Recent content by Dodge Shart

There no camshafts for-sale at any location/dealer/website. I got ripped off from a engine builder. Now I am chasing the pieces to fix my engine. I am looking for a LA small block retrofitted camshaft for my magnum block. #'s I am looking for 224-230 110lobe 520 lift. I am considering any size...

Just need to wire some things up correctly and it will start.

Update on this I never did figure it out. Instead I found a great deal on a 4 speed duster so got a fly wheel from brewers. The motor is now in the duster with the 4 speed. The dart now has the 318 with the 904.

Yes you did, and another guy has mentioned it. I forgot to check before I put the tranny back on so I was going to take it off again and check it. I am avoiding taking it back out of the car sense I just put all brand new fluids in it. That can get spendy.

Thank you that is good to hear. Thank you when you took off your dust cover did anything hit after that? I notice my crank pulley is little wobble to it. Would that affect anything. I got another guy asking me to check my crank play he thinks it could be my bearing for the crank.

reinstalled everything and still isn't happy.

Oh I see. Yes I made sure that lined up with the holes on the flex plate. It’s open and you can access it.

I put everything back together and when tightening the bolts the converter move forward looks like the same spot. Installed trans to engine then flex last. Made sure everything was on corrected and the right sequence.

I dont really know what that is.

when first installed I tighten the flex plate first then the tranny to block

The bolts hitting something the damage from the dust cover states that.

If this should work what steps should I take now that I have it out just reinstall it?

I have heard people using the 318 flex plate and throwing weights on the converter.

I still have the other flex plate from the 318

tranny is off but still under I got it stuck on the Ebrake cable and im just going to leave it but now it looks like its not hitting anything did not see any rub marks anywhere on the block