Recent content by Dor-Dor68!

@72bluNblu since u have experience with the SPC UCA's....will this boot go into place once put into the car or do I need to loosen the nut thats by the Zerk fitting to allow the bolt to move so the boot aligns?? Both UCA boots are just dangling like that...and wanted to ask before I start...

Very true, if it wasn't for the community here at FABO, id be lost. So thank you and all the gents here replying to me and my questions.

Yeah definitely leaning towards adjustables...and leaning towards qa1. Thank you :) And yea, we did touch on it a bit in previous posts here...that will come into play once I get the new drive train in. Im hoping for something around 400hp and possibly doing some autoX

Im looking into Hotchkis and QA1s...do u have any suggestions?

Thanks again @72bluNblu I'll order the Hotchkis sway bar this weekend and do a little welding It should be alright, I hope lol And like you & @S'cuder mentioned, I'll be good with either tie rod...I might go with 11/16s in the end. Also any input on the idler arm I order, since my steering...

Awesome thank you @S'cuder So I'll be good with either tie rod and using my existing drag link. The only other thing is that I did order a new idler arm from Proforged... Proforged Chassis Parts 102-10035 Proforged Idler Arms | Summit Racing Will i have any issues there?? Thank u and Merry...

Sorry @72bluNblu I forgot to ask, if swapping to 11/16 tie rods(inner and out)....would i have to swap my center link as well??

Thank you once again @72bluNblu So im going to have to return the Hellwig 5906 lol Full disclosure, I did call Hellwig and asked them about that bar fitting while I use the QA1 LCAs...they said it would work. They also mentioned possibly have to shortening the end links bolts....But im unsure...

Awesome idea.... and those are relatively cheap on Amazon. I'll consider it too

That'd be great if u could guide me in the right direction...im hoping someone in the past just messed with the part im thinking it is, and its fallen inside the door. That way I dont have to go hunting for pieces. Luckily they tried, customer service was so different back then. And yeah...

Hey @Dana67Dart Thank you...would u happen to what parts specifically? And glad u still have that 67 Dart in the family :) Did your dad mention the leaks to the dealership then? I'll also look into the windshield gasket...I did notice the leak/water go in and onto the floor board when I...

Window pictures.

Good afternoon everyone, So winter is upon us and here in Los Angeles, CA rain is a wild concept lol So in preparation of avoiding any more rust on the interior of my 1968 Dodge Dart, I wanted to ask the community for a little help. Ive heard that A-bodies are notorious for leak issues in...

Good afternoon gents, @72bluNblu @go-fish I wanted to update you...so Ive gotten a good amount of the necessary parts for this upgrade. But I wanted to ask about the Hellwig bar i ordered...I order the #5906 1-1/8" bar. My question is; since i will be installing the QA1 lower control arms...

Thank you!!