Recent content by dstdevl

  1. D

    connecting rod bearing size?

    Dartman, Sounds like you have a plan, good luck with this bud.
  2. D

    1992 dodge daytona parts car

    Hey guys, my son wants me to try and sell his car. This is a parts car only, 92 daytona. Kinda rare wine colored interior. Good glass all around. Has a moon roof that didn't leak. Missing engine and transaxle, will take 250.00 or OBO. Car took a hit on drivers side. Located in central Minnesota.
  3. D

    need 2 14" sbp steel rims & frt seatbelts black

    I have a couple but I'm in central Minnesota.
  4. D

    connecting rod bearing size?

    dartman, I'd take the crank and rods to a competent machine shop, have the rod cap and beams matched up and rebuilt if needed. have the cranked miked and make sure its good, polish or regrind if you have to. Get set up with the correct brgs and reassemble the engine. Bruce
  5. D

    connecting rod bearing size?

    dartman, I'd take the crank and rods to a competent machine shop, have the rod cap and beams matched up and rebuilt if needed. have the cranked miked and make sure its good, polish or regrind if you have to. Get set up with the correct brgs and reassemble the engine. Bruce
  6. D

    Open exhaust Hp gain?

    Its all about power to weight. Heck put the whole car on a diet.
  7. D

    Oil Pressure Sender

    Yep, should be a mechanical water temp gauge as well as a temp light in your cluster by the looks of that 1st picture.
  8. D

    Sonic check LA area

    I stand corrected moper
  9. D

    i need help w/duster engine

    I agree with guiter on this hole thread, sounds like he has been to the same school. Bottom line, pull the engine, mount it on a stand and go to work. Install your new cam and see for yourself what this thread bares. BT
  10. D

    74 Duster

    outer fender or inner fender. wfat do you mean by molding. Bruce
  11. D

    What should I expect to pay for quality machining

    I think you'll spend about a grand for the work you listed. Your not doing anything with the heads or having the shop doing any assembly. The only thing I didn't see was rod and piston work.
  12. D

    WTB: Full set of Black Bucket seat belts

    Pete what color is your interior? And will early70 seat belts work?
  13. D

    valve float

    ? why do you think your getting a valve float ? what is really happening when you DRIVE it past 6800 rpm ? could your carb be to small for your app
  14. D

    440 ring gap

    Right On Moper, KBs run all the way into the deck HOT area. 2nd ring creates a vacumn slows down piston, ADD NOS add clearance
  15. D

    Sonic check LA area

    .100 min, critical areas drivers bank ext side pass bank int side.LOL
Back
Top