Recent content by GT 64

I have a set (4) 1964 Dodge Dart 13" hub caps. They are in good condition with very small dings on a couple of them and some of the black paint is coming off. $20 plus shipping.

I have a P/S steering box, steering arm, idler arm, center link and tie rod ends from a 1975 Plymouth Valiant free to a good home (or a bad home-I don't care- I want it out of my garage.) It's located in central Florida, 1 1/2 hours south of Orlando. Come and get it.

1964 Dart GT convertible, original V-8, 273 2BBL., Automatic, P/S, new manual top, original engine w/ new rings, bearings, hyd. cam, push rods, timing chain, and electronic distributor. Front suspension from 1975 Plymouth Valiant- control arms, spindles and torsion bars; new rotors, calipers...

I have a P/S gear box from a 75' Plymouth Valiant ( Dodge Dart) with center link, tie rods, steering arm and idler arm. I'm in central FL below DisneyWorld. If someone needs it come get it out of my garage.

Hi. I have a 64' Dart GT convertible I'm going to sell soon. It's all original v-8 auto, P/S, manual top. The only up grades are 75' a-body disc brakes and control arms, .87 torsion bars, the 75' rear end (all wheels are 5 by 4 1/2), with 2.76 gears, heavy duty rear springs, and 2002 Sebring...

Still have them. They're the same length. Optical illusion. Camera angle.

I don't think so. I believe the wheelbase is wider on the 67' and up A-body and I'm not sure if the power steering gear would fit.

Bars only.

Yes, though the shipping may be more than the price of the bar.

Thanks. Just remembered I also have a set of 318 bare heads I don't need. I believe they are the 2843675 heads and are listed for 68' thru 74' 318. I'm not sure if they have hardened seats and they would need to be rebuilt. $30 for both.

I believe it was a 6cyl. but there wasn't an engine or trans in it. The rear was a 7 1/4" and I'm not sure if they put that in the V-8's or not. If you know how to identify the difference let me know.

Cleaning out the garage and I have a power steering gear, pitman arm, idler arm, centerlink and tierods from a 1975 Plymouth Valiant. I used the control arms and brakes on my 64' Dart and these were left over. I don't know the condition of the steering box but all the joints feel tight. I live...

UPS says $48 to Calif.

Carb has been sold. Manifold still available $100 plus shipping.

Set of bare 318 heads. Casting #2843675. Listed as 68' through 74' 318 heads. No cracks. Stock condition. Needs rebuilding. $35 for both. Can be picked up in central Florida.