Recent content by Haney

  1. Haney

    Front Drum Brake Help - 68 Barracuda

    Yes, I am going to drill the new one. Wanted to be sure it would work first. Did a cheap 5x4.5 Conversion by drilling front and back.
  2. Haney

    Front Drum Brake Help - 68 Barracuda

    I need to replace a warped front drum on my 68 Barracuda. The new part number drums do not look exactly like my old one. It looks like it will fit OK but the lip of the drum is different and it is a little taller. Here are some pics. Thoughts? New drum is a Raybestos 2932R
  3. Haney

    Green Axles.

    Your 72 has green bearings with snap rings. The current 3.55 has no thrust button in it. I took it out. The 3.23 I gave you will work with Green bearings. I had it in a car that had them. 3.23s will be great in that car. 2.76s in that car and 3.18 is a dog. That is what was in the 7...
  4. Haney

    [FOR SALE] A body new gas tank

    Will this fit a 69 Cuda?
  5. Haney

    [SOLD] 1972 Dodge Dart Swinger

    SOLD
  6. Haney

    [SOLD] 1972 Dodge Dart Swinger

    Christmas time is near! All this needs is a red bow......
  7. Haney

    [SOLD] 1972 Dodge Dart Swinger

    Yes Sir!
  8. Haney

    [SOLD] 1972 Dodge Dart Swinger

    This is really a very, very nice car. Offers? Would make a nice Christmas Present for that discerning Mopar Fanatic. lol
  9. Haney

    [SOLD] 1972 Dodge Dart Swinger

    1972 Dodge Dart Swinger. This is a very original car with brake and suspension upgrades. I started with a “survivor” that was wearing 70% original paint, original interior, and vinyl top. It has 75,*** miles. It has the factory 318, 2bbl, 904 Colum Auto that is all original. It is a manual...
  10. Haney

    Howard's cam suggestion

    I built a stock spec 340 with redone J-heads upgraded to 2.02/1.60 but not ported. Put in a Comp XE268 and could not be happier. It is in a 68 Barracuda and that car pulls hard. Used an RPM Eddy and 750 Eddy carb. It is a 904 Auto, factory "hi-stall" converter, 3.55 gears, cheap headers and...
  11. Haney

    My 5.9 Magnum Build - Junk Yard Mule

    With the added lift of the cam, do you think I would have any issues using the much thinner gaskets?
  12. Haney

    My 5.9 Magnum Build - Junk Yard Mule

    Thanks for the reply. Yeah, I am trying not to let this thing snowball on me. I was not to worried about the heads, but you make a good point. I was planning on running the 1008 Fel-pros at 0.039 compressed. There are some negative posts about the Mr. Gs. You ever had any trouble with them?
  13. Haney

    My 5.9 Magnum Build - Junk Yard Mule

    I totally forgot about the plenum gasket deal. I will check under that intake. Even though I am using a dual plane Mopar Carp intake on my build, I would like to know what caused the things I am seeing.
  14. Haney

    My 5.9 Magnum Build - Junk Yard Mule

    Heads and the block after I vacuumed and cleaned up
  15. Haney

    My 5.9 Magnum Build - Junk Yard Mule

    I have had a 5.9 Magnum out of a 98 Ram that I traded a set of wheels and tires for over 8 years ago. It has sat in my garage ever since just waiting for an opportunity to live again. It is supposed to have come from a running truck with 80K miles. Fast forward, I have acquired an 84 Ram...
Back
Top