Recent content by HiFire

Got nothing to add. Everyone made great suggestions, just thought I'd add another Dodge.

Great choice. I’ve been using a Skip White HEI distributor for 5 years on my 71 D100 340 with no problems.

I used the same lifters with one of their cams in a stock 340 a little over 2 years ago. I didn't disassemble the lifters. The engine was running great before the change so I made sure everything went back together exactly the same. Break-in went smoothly and I have since put on about 5,000...

I’ll throw my hat into the ring. I would pick liberty because of the low lift numbers are better.

I have a 742 open with 3.23 that I couldn't give away on craigslist last year. Sitting in a bucket taking up space.

Dodge representing at the Hawaii Kai car show. I'm the Sweptline. Didnt meet the Power Wagon owner.

Not sure. Didn't ask and don't have the tools to measure. When I get it I'll try to remember to take a pick with the adjuster in the cup.

I used a Trickflow length checker. I called Trickflow and the measurement is from the ball tip to the inside base of the cup. I ended up with 7.100. Ordered pushrods from Smith Bros and I'm getting oil through pushrods. They are sending me 1 so I can check my measurements just incase I measured...

I would be leaned toward the solid mount causing the noise. I’m running a 203/205 married setup in my truck with no transfer case noise. I do have rubber mounts. I’m praying for you that’s it’s not the case itself. That sumbitch is heavy.

Just want to give a shout out to Rocket and Kendog for helping me out behind the scenes with parts for my truck. They went above and beyond to get me back on the road. Thanks to everyone else for the input and support. FABO is a great community to be apart of.

Thank you Kendog. I really appreciate the help.

What do you think about running a set of 273 factory rockers?

Closed almost 15 yrs ago.

I have a 68 340 with a broken stock rocker. Looking for an adjustable rocker setup to replace the stock stamped rockers. Thanks for the help.

I've only had the engine for about 6 months. No telling how the previous owner drove it. No one carries rockers in my state. Summit wants @ $20 to Ship 1 rocker. I'm going to post a wanted ad for the parts needed. Looking into the future I want to run adjustable rockers with a solid cam. For now...