Recent content by JGOODY

Would using the smaller wheel cylinder create a bleeding problem? I've been having major issues with bleeding the rear brakes. I have front disc and rear 11" drums. The fronts bleed ok but both rear wheel cylinder cups are sucked in and I get no movement in the shoes. My master cylinder is...

When using 11" rear drums what is the correct size wheel cylinder bore 15/16 or 1 3/16

when using 11" x 2 1/2" rear drum ( manual ) brakes does anyone know the correct wheel cylinder bore size to use 15/16" or 1 3/16" Thanks

I loosened brake lines at master cyl . Can just barley turn rotors VERY tight but not locked.

Everyone thank you !! I will keep you posted on what I find out tomorrow Jeff

I' m not sure what you mean by pressure at the master? I am convinced if I crack the lines at the master it will free brakes up . I disassembled a caliper last nite the piston was extremely tight in the bore if I put air pressure thru the bleeder it pops right out but putting it back in the bore...

All of my lines , hoses ,master cycl, pro portioning valve , calipers everything is new

Thanks dart273 Iam using the same type master cyclinder with bolt in center. Iam going to try bleeding at the prop valve as you suggested. I am Thinking I Have the wrong master cyclinder

I loosened the master cyclinder and also pulled back on brake pedal. Brakes still locked

Awesome suggestions , how can I verify if I have the correct master cylinder? What would be a good part number from say napa or advance.

Trailbeast thanks I will check it out, i don't recall an actuator rod adjustment though?

My hoses are brand new, but that is not that it can't be a possibility any other ideas

I am completing a ground up resto of a 70 duster340. Front disc rear drum with manual master cylinder . I have bleed the master cylinder twice on the car with no air present. I have billed the entire system with noir present on the second bleed. I still have a soft brake pedal but more...

Hey everyone new to FABO. I currently own a very nice 1967cuda fastback 340 4spd. I am considering purchasing a 1971 demon that the owner claims to be a "Sizzler" car. The car is partially dismantled but in very nice shape. It comes with many extra parts including a complete 340 but not numbers...