Is this the only way to get caster w/ the "fixer" bushings? I installed mine as suggested on the box. Should I be able to get positive caster from this?
Do you plan on only making vinyl for cars?
how about "Traffic Graphix"... Something like that.
Also, if you are going to put your number in the phone book, people typically call the first on the list. Thats why you see so many A1 or AAA plumbers.
I really know nothing about how the transmissions or the linkages really work. The kickdown linkage can interact with the shifter, i just dont know when it goes forward backward. I thought there might have been something in the tranny itself that would "push" it out of gear if something was...
Hi,
I wanted to get some pros input on my problem. I recently installed a factory console in my duster. I fabricated some of the linkage going to the gear selector on the tranny. It works great except when i really step on it. It will kick out of gear if I really step on it. Do you think my...
I know this is really simple and you have probably already tried it, but my car was doing the same. Battery was almost dead...
Might be the same thing, might not.
My car does the same with stock power steering. As said above, caster is usually an issue with these cars, and the car will basically "float" around when there is not enough caster.
Another issue that I have had is no one knowing how to properly align an old mopar at the local shops.
In my experience. The metal seems to surface rust pretty quickly after blasting. I like simply using a DA, paint remover, and a wire wheel. Have never gotten a car dipped before but it is pretty comparable in price.
Havnt had a chance to test it with the key on, but there is no wire on the oil sender. Or any wire near that could go there for that matter (other than this one). I will check it soon.
These things work great!
You could just save up and pay a professional to do it (the hard stuff that requires the specialty body tools)... I know - but wheres the fun in that.
Can someone tell me what this wire is for? It is brown or tan and smaller than the brown and black/yellow wires going to the coil that are also in the picture. It lis in the same bundle as the coil wires and temp sender. though with a spade style connector where the arrow is pointing. A plus and...