Recent content by Kraftei

Can a mod take my add down, going to pull it for the winter. Thanks !

possible trades... camper van ?

Possible trades... camper van ?

Pictures of the detailing !

1969 Dodge Dart - 2900 pounds - was a 1/4 mile car that was converted to street use by the previous owner. Reliable, fast car, puts a smile on your face !! Needs nothing mechanically, paint and bodywork is showing its age. I have not built up the confidence to use the nos yet. The dyno numbers...

1972 Dodge Demon - factory H code 340 / 4 speed - none matching numbers - the concept was a car that looked period correct / representative of the 70's ! The car is a crowd pleaser where ever it goes, gets the most attention of any car I have owned. Stony Plain Alberta $58,000.00 CDN...

Thanks for the information. I took some new pictures today and will put the adds up here, see how it goes !! My gut tells me maybe wait till next Spring and try again but we shall see ;o)

I live in Alberta Canada. I have been collecting, restoring and driving muscle cars since I was 17, my very first being a 1970 Road Runner. I used the Auto Trader to sell my cars (until that died out) and then I moved over to Kijiji. This summer I decided to sell one of my A Bodies. I have two...

I put the new pilot bearing in yesterday, it was loose as well so I used Permatex Bearing Mount #60950 to secure it. I am curious what experience others had with this bearing , was it a press fit, did you use a bonder ? I believe that the loose bearing was contributing to my issues. I researched...

I am still waiting on the rebuilt tranny, the fellow is still waiting for parts from the US. I pulled the clutch today and everything looked good except the bearing was loose, it would be able to walk out. I imagine that would cause some problems. I could see a unusual wear pattern on the...

I did not have to do much on this one, I recently acquired it in a horse trade. A Dodge Dart 451 stroker. The previous owner got tired of the money pit. Originally a California car, someone may recognize it, it has gone through many changes. It mostly needed a good cleanup and some minor...

A friend of mine in Red Deer had a spare tranny, his mechanic (expert) checked it over and it needs a rebuild so he is waiting on parts. Once he has it done I am going to give him this one (as a core) and he can check it over. That transmission is the new style, mine was a 1970. The...

Its a 1972 Demon, 4 spd. I hear you, I need to modify the connectors to fit and weld them in. I am going to pass though, the car is not going to be driven hard as its more of a show car so I am going to leave it alone. I was just being overly protective. In hindsight I would have fabbed...

When I wiggle the output shaft the input flops around like a joystick. The driveshaft is 50 inches long from knuckle to knuckle and the extension is 9 1/2 inches knuckle to end. Installed it looks normal to me, a couple inches of silver showing. 59 total.

I have a thumping noise, the tempo increases or decreases with speed. Clutch engaged, disengaged, engine on / engine off, gear engaged / disengaged same noise. Vibration in shifter. Stereoscope has noise at transmission output. Gets worse after shifting hard, calms down a bit after. The...