Recent content by LM29H2B

My set that I bought in the late 80s. I believe the yellow would be 4 degrees. Jerry

Sent you a PM. Thanks

Looking for a decent set of drip rail moldings (4 pieces) for my 1972 Demon. Shipped to CT. Thanks, Jerry

Looking for 4 of these clips that holds the interior roof trim above the door. 1972 Demon/Duster with cardboard headliner (if that makes a difference). Thanks, Jerry

This is the set up that holds the lower heat shield on the 1972 340. I did not use the bolt/stud provided in the kit that you are asking about on my 72 demon. Jerry

1972 Demon/Duster. Looking for the rear brake hose bracket that holds the rubber line coming off the differential junction. It attaches to the left hand exhaust hanger bracket (see picture). Thanks, Jerry

Putting my steering column back together and looking for some help. The column is for a 72 Demon with floor shifter. My question is, should this column have the wave washer? I don't believe the original came with the wave washer but there seemed to be too much play for the key release piece and...

Looking for the heater box J hook as shown in the picture. This is the shorter version for the late 72 models Thanks, Jerry

Not sure if these work...let me know Jerry

I will take some pictures tomorrow Jerry

Thanks for all your help guys...saved a bunch of hours. Jerry

Great pics!!! Thanks a bunch Jerry

Does anyone have pictures or access to a 72 (or same) door glass installed? Been 30 years since I pulled the car apart and the service manual and parts books are not as detailed as I would like. Thanks, Jerry

Hope it is ok for me to jump in. Was just going to post a similar question about rear backing plates for my 72 Demon (8 3/4 with disc front). Are the small bolt plates the same for all years? I feel like I took A off of the car years ago but they had 2 1/4 shoes on them vs B which had the 1 3/4...

Tried sending a pm...will take them