Rear Backing Plates

-

RustyRatRod

I was born on a Monday. Not last Monday.
FABO Gold Member
Joined
Jun 7, 2010
Messages
104,822
Reaction score
102,414
Location
Georgia
I have some rear backing plates I am not going to use. How do I tell what they fit? They are the five hole plates so I know they at least will fit the 8 3/4 and Dana. Thank you drive through.
 
first picture is small bolt second is Big bolt , Notice the difference in the depth below the wheel cylinder for the axle flange. Big bolt is much deeper. If you post a picture I could tell you what you have. Last picture is front small bolt

DSCN0646.JPG


DSCN0924 (2).JPG


DSCN0921 (2).JPG


DSCN0649.JPG
 
Hope it is ok for me to jump in. Was just going to post a similar question about rear backing plates for my 72 Demon (8 3/4 with disc front). Are the small bolt plates the same for all years? I feel like I took A off of the car years ago but they had 2 1/4 shoes on them vs B which had the 1 3/4 shoes on them.

Thanks
Jerry

20230414_141934.jpg


20230414_141908.jpg
 
-
Back
Top