Recent content by LuckyJackson

PM sent

Good Morning. I am interested in the black carpet. Can you figure shipping to Connecticut, Zip 06477. Slowest/Cheapest is fine. This is from an A Body (70 Duster) because the post is unclear on the carpet origin. Almost new means no defects or worn spots? Thank you.

Good advise from both of you. thanks, I'm going to leave the mechanical line in for now. I've got to get this dash bezel in and see if my modified 1973 dash harness is functional. Bench tested a couple of times and there should be no issues. There's a hundred things I could do on this car but...

Yes, Got a good look down there today. Copper tube coming out going to an aftermarket gauge....How did I miss that?!? Always thought it was a tach that was added. Not sure what I'm going to do. Not experienced enough to remove distributor with any confidence yet. I will put the dash bezel in...

Yes I attached the spring clip behind the gas pedal. On the engine compartment side the stopper was in the black goop. So no grommet between the stopper and firewall? Maybe a previous owner just set it in some sealer. I will look again tomorrow for a place for the sending unit behind the intake...

Run into a Couple of problems on 1971 Demon 340. 1) Throttle cable snapped. I've Installed a new one but I'm wondering where it meets the firewall....Is there supposed to be a grommet there? When I removed the broken one, the stopper disc on the old cable was kind of stuck in some black goop...

PM coming

Sent you a message on this

Different door switches for 1973 and up explains a lot. I'm glad I didn't rush to put the new harness in yet. Exceptional info on Mopar part numbers, I will look at the harnesses for numbers this weekend. Hopefully the 1973 and up switches are available through someone and are the same threaded...

Geez....not a response. Someone has to have some info to help me out. These issues can't be that unique.

Interested in both. Shipping to 06477. There's no urgency. Cheaper the better. Let me know total and preferred payment. Thanks.

Hello all, I am at the tail end of getting my brother's 1971 Demon 4 speed back on the road after sitting for 4/5 years. Reason for sitting was that the last time he ran it, both the engine and dash harnesses smoked/burned and he removed them both. He's lucky whole car didn't burn. I have gotten...

Took some time and sanded the reluctor with some 350 grit. Got most of the surface rust off. Improved some grounds and cleaned the distributor pigtail with some battery terminal cleaner. Replaced the ECU from Year One with one I had gotten from a guy who sold me his 1969 383 from his charger...

Thanks for the suggestions. Took the weekend off from playing with it. Going to try again today. I don't know why Year One sent a four prong module with a double ballast resister set up harness. Makes it kind of difficult to understand. So there shouldn't be 12 volts coming out of BR. Is 6 volts...

Thanks everyone for the info. When 67Dart mentioned 3 verses 2 wires out of the distributor I took a longer look at it today.....It sure looks like a Mopar distributor. It has a plate to with a number 3656763. Part #? Took some pics. If it is a Mopar, it was used in the old MSD system, and it...