Mattax's latest activity

  • Mattax
    Mattax reacted to MadScientistMat's post in the thread Replaced the dual point with HEI with
    Like
    Like
    .
    Bewy, that text refers to the maximum current allowed by the HEI module. It isn't necessarily the same as the current the coil would run...
  • Mattax
    Mattax reacted to slantsixdan's post in the thread Replaced the dual point with HEI with
    Like
    Like
    .
    That thing where you get confirmation, without having to smell the particulars, that you made the right choice of mouseclicks awhile...
  • Mattax
    Mattax reacted to slantsixdan's post in the thread Replaced the dual point with HEI with
    Like
    Like
    .
    In context: bigger than factory 0.035" if we're being strict, 0.040" if we're being permissive.
  • Mattax
    Mattax reacted to RustyRatRod's post in the thread Replaced the dual point with HEI with
    Agree
    Agree
    .
    Trust me when I say Matt doesn't need you to school him on electronics.
  • Mattax
    Mattax reacted to RustyRatRod's post in the thread Replaced the dual point with HEI with
    Like
    Like
    .
    "big ***". That covers a lot of territory.
  • Mattax
    Mattax reacted to MadScientistMat's post in the thread Replaced the dual point with HEI with
    Like
    Like
    .
    Maybe not in those exact words, but all your arguments for a ballast resistor with HEI use the premise that the coil is reaching full...
  • Mattax
    Mattax reacted to MadScientistMat's post in the thread Replaced the dual point with HEI with
    Like
    Like
    .
    Um, no. I've used an oscilloscope and current probe to view current draw on lots of different coil types. I've never seen one go to full...
  • Mattax
    Mattax reacted to chewy's post in the thread Replaced the dual point with HEI with
    Like
    Like
    .
    The manufacturer says to use an e coil 45KV or more, and 12V wire to coil no ballast. Not doing so will void the warranty on the...
  • Mattax
    Mattax reacted to Newbomb Turk's post in the thread Timing with
    Like
    Like
    .
    I’ll ask him. I know when he figured it out and that’s when he did the ABAB testing on the magnapulse ignition. It’s better when he...
  • Mattax
    Mattax reacted to Newbomb Turk's post in the thread Timing with
    Like
    Like
    .
    I find it hard to believe they didn’t understand slew rate back then. I have not seen a timing chain or anything else like they say...
  • Mattax
    Mattax reacted to Newbomb Turk's post in the thread Timing with
    Like
    Like
    .
    I didn’t say all engines need the same curve. I say they all need a curve. Can you pick out one or two situations where maybe Thats not...
  • Mattax
    Mattax replied to the thread Timing.
    You'll have to ask Tuner if he knows when this became fairly well known. The DC literature refers only to possible mechanical causes...
  • Mattax
    Mattax replied to the thread Timing.
    Pretty much. A drag race engine will run colder than most others but other than that its the same.
  • Mattax
    Mattax replied to the thread Timing.
    We are on exactly the same page. The graph is a later version of this one It is in reference to breakerless distributors, which have...
    • 1763849980182.png
  • Mattax
    Mattax replied to the thread Guns, Dogs and Blades QnA.
    Dry practicing for the match last night and no ping! The clip barely popped up. Best I can figure the clip ejector is going south. I...
Show older items
Back
Top Bottom