Mike69cuda's latest activity
-
Mike69cuda replied to the thread I think i broke rear main bearing.Don’t a lot of aluminum engine parts like blocks and heads have thread inserts out of the factory? Putting a helicoil in a cracked hole... -
If you use the original cap it is already sized to your block. Take it off , Fix it and put it back on, If the bearing looks good reuse it.
-
Take the cap to a Machine shop and have it filled with spray weld. Then have it drilled, threaded and reface the pump surface. I would...
-
Headers on an A body have to be the good ones or else they smash the passenger side flat on the street...
-
Mike69cuda replied to the thread Headers vs. Manifolds.You might make sure that the b-body manifold will clear the steering on the drivers side.
-
Mike69cuda replied to the thread Headlight Relay Kits.I made my own with a couple of $5 relays. Not very hard if your under hood wiring is in reasonable shape and not too brittle.
-
Mike69cuda replied to the thread Replacing my Intake Manifold Question.Spray some Kroil on the drain plugs and let it sit for a day
-
The brake switch is attached to an "L" shaped bracket. The bracket is attached to the brake pedal support that goes from the firewall...
-
Mike69cuda replied to the thread stoplight switch.I just adjusted mine. Very difficult to get to. I also took the front seat out, makes it much easier. I had my son hold the switch...
-
Ah, so you know how it actually goes.
-
Mike69cuda replied to the thread AC installation update 4/12/2024.Haha, famous last words…..
-
I totally agree, as I was thinking Gorilla tape, but I don’t have any at the moment. I do know I’m not pulling it back out again. :-)
-
Mike69cuda replied to the thread Run stand wiring.$33 on Amazon https://www.amazon.com/gp/product/B001IVKZMS/?tag=fabo03-20 I have bought both of these.
-
Mike69cuda replied to the thread Run stand wiring.$13 on Amazon https://www.amazon.com/gp/product/B07GBV2MHN/?tag=fabo03-20
-
I don't think it'd hurt to put a small fuse panel on the run stand and also wire in a large fuse for the alternator circuit. Just...
