Recent content by modracerx

go on you-tube type in hughes cams ....there is a great one on there whiplash cam ....i would go with the lunati voo-doo line ...great cams !!!!

nice set just needs a little polishing ....missing one corner connector ...i can't find it but it may pop-up ..lol....reason for the cheap price for now ...

looking for non pitted good chrome taillight bezels ...need both ...will re-paint the black ...

left and right top windshield trim off 74 duster ...no dings or dents great shape ...just a little polish needed ....a steal for 25 bucks....fits 70-76 duster demon dart sport

with the 410 and 4 speed that will get you going out of the hole ....being a 90% street deal you need to hook so maybe try the 104 a little softer and see ? i would degree it both ways and mark it good then its easy to just pull the cover and advance it if you need more bottom ....on the...

great guy ....hope it comes back to him 10 times over ....nice if the old tale do onto others as you would like them to do onto you !!!!!!!! had a lot of great guys on here help me with my first mopar ...its almost complete ...

ooooooooo by the way i ended putting mine voodoo in a 100 after running it at 104 ...the 904 converter and my 355's needed more help down low .....

thanks iron mike ...can put it on the wheelie bars ...lol....you will have one hell of a power plant....again JMO but that still is a large cam for those heads and you never want to give up that bottom end to get it rolling ....as i said before 102 is were i would start ... good luck x-mas...

this is my car it has a voodoo cam just to let your know ...

lol ....if you have mikes lifters why have you not talked to him about the cam as i advised you in your other post ....this cam with your combo and the right intake could be close to or above a 600/600 small block !!!!... people would kill for that ...from what you had you will think you added...

the 734 idles like a funny car ...lol....JMO on the 102 that still is a big cam for a car you will drive on the street also ....it will just move the bottom down a few rpm and build a more cylinder pressure ...i did it on the 703 in my duster glad i did ....

if anything imo that cam is on the big side for your heads ....it is all about torque and its curve ....h.p. will take care of itself ....mike at mrl has made 577 ft. of torque...just a tic off 600 h.p. with a smaller voodoo roller in a build close to yours ....pm him on here MRL is his handle...

40200734 lunati voodoo solid roller .....255/263...600/600....lsa 110 / ica 106 ...install at a 102 ....its there pro-street /mild bracket racing ...3200-7200 rpm range...tight lash 16/16....harold birkshire designed the voodoo line of cams for lunati ....IMO the smartest cam designer hands down...

need to talk to tim at bullit if he is still there ....he would not sell you that cam if you are looking for more bottom !!!...also look at the voodoo lunati line best off the shelf cam line there is ...match it to your rpm range you are looking for ...i agree on the intake ...killing you if you...

the car