Recent content by MODTOP-Billy

That console top looks nice! I was looking at a wrap but was reading about Hydroponics "dipping the bumper" and with the bumpers being a "blade" style I thought a dip will not produce wrinkles? There is a graphics race car shop on the other side of town I have been told to go talk to, we will...

Any advice on how to make a fiberglass bumper look like stock Chrome? Wrap? Dip? Paint? I got the bumpers on and mocked up I am now ready to pull off and do the final finish. I hope to get this car painted and back together for some spring runs. It is just a hot small block for fun not worried...

Thank you for the help and advice. I think the factory correct way here is exposed springs for 67-69 anyways. Here is a picture from the truck of some blacked out springs, I cut up and painted the box my carpet came in. I was going to use the cardboard as a template. but there is no good way...

FYI, The ACC carpet box is just about right to cut up paint the back with black paint and hang over the seat hooks. If anyone ever removes my back seat ACC will get some advertising. New carpet is in old Billy is sore. Car looks like it did 25 years ago only nicer. Console strip is a little...

Well, this is part of the fun playing with Mopars. My back seat looks the same covered half way down only in the top well area. So still what to do? factory looks to be nothing. I know I will try to make something, it's done gone and started bugging me. Side note I ordered a new carpet set...

I got the well liner in I am talking about from the seat hooks down. They may have came with nothing? I have never had anything and I have had this car since 1991 but it has seen several tear downs and re builds before me and after me. I marked in red what I am looking for. you have to squat...

HEY, I need some help, Anyone got a photo of the conv trunk divider panel? Mine is a 68 Barracuda it has never had one since I have owned it. Darts should be close if not the same. I will have to fab me one up. A picture would help a lot. I assume it hung over the 2 clips that the seat goes...

Here is a pic of what I did. This was 30 years or more ago and there is no telling what that bottom strip came off of, but it was cuda or dart. I did have to trim the ends to fit under the conv. end pieces. This is a little crude but I placed a bead about 1" long of black sealant spaced out...

I glued the 68/69 steel trim in my conv. and beside just telling you guys no one has asked. The gasket is different between the 2.

How much to ship to 29307? I got no problems with the 25 bucks. I am running a set off a coupe that I cut down and welded that aint that good. Send me a personal message? never bought off this board before and thanks BB

40x60 in upstate South Carolina just built 5 months ago, pole barn building cost 74k and it took them 3 months day one to finished. With site work, gravel, power, water, lights I am just north of 100k. Still need to pull 220 power to welders and finish work benches. Be careful how you chose I...

Well thank you for all the advice and help. I still have not found anything about the original colors? I have to assume it is body color and I have to assume they made more black interiors than color. I did it both ways black and red, black was very ugly. I have the dye, the cleaners, the...

Yes sir these here, I stole this pic. my old ones were painted on the door red and they looked burned? Like they came off a car that was in a fire burned all funked up and now is my chance to replace them. I painted them red in 1991 so I can only blame myself. I have a set all tore apart and...

Does anyone know what is the correct color the little lower door vents are to be on a 67-68 Barracuda? I am re doing a red car with red doors, the old fresh air vents were painted red. I got my new red door panels from Legendary and want to fix these vents before I install the new panels. All...

Thank yall for the help, I will swap them out to known 69's I have owned this car for 20 years now and never noticed the cranks are different. This is a spring special and a fastback with a Vinal top so it is a odd fish to start with. It has been sitting, waiting on me to do something with it. I...