Recent content by moparhunter

Thank you very much. That actually helps quite a bit. Very appreciative.

Hi All, I’m hopefully putting in the rear glass on my Dart very shortly . I understand there’s two different clips that go in the back window channel to hold the trim on. Probably a long shot , but does anybody have pictures of how the clips sit and which one ( thankfully I got enough factory...

Price reduced !! $60 !!

$80 usd Located in Winnipeg, Manitoba , Canada Will ship your dime PayPal accepted

Yes, according to MSD it is compatible I don’t have the number in front of me.

It is not the stock coil . It’s a MSD Coil

Hi All, Somehow, I can’t wrap my head around this on what I should wire what to what. I have a 69 Dart originally at 3:40 swinger car with points. The car is now big block swapped with a ready to run 440 source distributor. I know I have to eliminate the ballist resistor. But apparently it’s...

OK, so I have power out of ignition one and an ignition too. Do I just jump one wire between the two to connect them or I’m lost here help

so just eliminate the ballist resistor and connect the two wires together ?

i did read the instructions , that is how i have it wired but i still have the ballist resister in place

yes that is the distributor. so i need to eliminate the ballist resistor ?

it has the " factory two wire one i jumped it didn't seem to make a difference

Hi All . I’ve put my 69 Dart back together after many years it is an originally a 340 car now has a 400 base motor in it. Ignition has a 440 source ready to run distributor with matching coil. When I start the car it starts, but soon as I let the key go to the run position the car stalls any...

My 69 swinger is a vinyl top car unfortunately when I bought the car, someone had already removed the top and closed up some of the holes due to a repair so I’m about to put the final top back on and I’m having to figure out where the trim around the top goes specifically quarter panels and...

My car has been apart for 25 years. I can’t remember how to put back the emergency brake cable under dash anybody got pictures ?