Recent content by NewToMopar

Will one of the late model (1986-91?) LA block 360's with the factory serpentine belt setup fit into my 1965 Barracuda? Without cutting everything up? Anyone know? Thanks Gary

Have a volt meter and have power to the starter, but nothing after that. The car has a false firewall and everything is hidden behind that. Just about have to pull the engine to get the false firewall out. Can not see the bulkhead pass thru or the fuseable link. Ugh.

I is all coming out eventually, 4 speed overdrive unit already sitting waiting to go in. But need to be able to get it out of shop and on trailer to get the lifters/cam replaced.

Ok, took several pictures standing on my head, in the storage area. This is the only one that was focused. Says Hurst on the shifter handle.

Massive gas leak down by fuel pump. Pulled alternator to get to that area. Replaced all the cracked hoses and loose clamps, put in new fuel filter. Want to turn over engine to see if leak fixed. Nada. No click, no nothing, no lights. Put battery on charger over night. Nada. Put another...

My 65 Barracuda (with what I think is a 904 transmission) has some form of slap stick shifter in it. The question is how do I find reverse, neutral and park. By messing with it a lot I have first, push forward second, push forward and third. Downshift process, pull back real hard, bang...

My car seems to have never, well maybe, had a heater, there is a plate over the fan cutout in the engine bay, there is a plate over the heater controls area, and there are no internal parts behind the dash. The question is, is there a aftermarket Heater / A/C unit that will fit, with a...

How do I remove the brightwork trim from the drip rails without destroying them? Thanks

I am getting a web attack, Malicious Toolbox 9 on every page I try to visit on ForABodiesonly.com, Anyone else

Thanks for the information, turned out that someone in my car club had a set that would work, got for 6 pack.

First look at my name, I know a lot about Fords, GM and AMC but next to nothing about Mopar. I have an opportunity to pickup a 1991 Dodge 360, with auto transmission. This engine came out of a Dodge car and has approximately 98,000 miles on it. It is supposedly a LA engine with a factory...

One of my torsion bars that holds the hood up has broken, can anyone tell me which cars have bars that will interchange? Ok second part, where can I find replacement bushings/bearings for these? Thanks Gary 1965 Barracuda, 79 318 904 automatic 1965 Barracuda, 65 273 4bbl 4sp 1965 Barracuda...

Does anyone have any information on putting a 3G hemi into a 65 Barracuda. I have a chance to get a 2007 5.7 hemi with electronics for $500 and would like to know how much work it would be to put in my fish. Gary

I saw an article in one of the car magazines when the 5.7s first came out, where they put this engine in a 1964 or 1965 Barracuda. I am looking for that article since I am now at that stage, ie engine choice and install. Does anyone remember where the atricle came from or have any information...

I have a 1965 Barracuda. It has a 79 318 in it with a 340 four barrel intake and an Eddie 650 carb. I am about to remove the engine and am confused about 360 engines. I like roller cams, but I also like shaft mounted needle bearing rocker arms. I have heard that 1985 to 1991 360's are roller...