Recent content by Ozcuda

Not sure on the track but not when it was on the dyno. Thanks Oz

Petty, Yes I will be installing a switch & removing the control unit for the fans & pump. What is your alternator off ? Thanks Oz

They run off a control unit I have no way of switching them on or off. I may have to fit a master switch. Thanks Oz

Yes that would be good but I run a Davis Craig system the water pump & fans run of a control unit it switches itself on & off as the engine heats up & cools down. I was thinking of removing the control unit & just going to a switch instead. Thanks Oz

it has been little changes a long the way it's run a best of 11.29sec @118mph. I have 3 batteries & to keep them maintained I swap them around in my work truck. As for the Valve train it was checked a few months ago & all good.

Yeah new carb but was fitted at the tune shop & set up on the dyno was running perfect when I left.....A week later go to the track......I haven't touched a thing & it's not right. My tuner thought it was fuel delivery...But after a little fiddling we think it's more that the 35Amp Alternator...

Hi Bob, It's a new Holley 850HP series double pumper Cheers Oz

No visual pressure gauge yet but we watched it on the dyno runs & no pressure drop. It seems to be after I shift into 2nd gear or in top gear not a problem at launch. Thanks Oz

We started the pressure at 6psi & turned it up thinking it might have been the problem. The problem is at high RPM. It's a new carb with slosh tube & I have a sump in the fuel tank facing rearward so fuel pick up shouldn't be a problem thanks Oz

Hi, Fresh fuel new carb I am checking the filters Thanks Oz

Yeah already got them. thanks Oz

Hi Guy's, It's been awhile since I've been able to get the old bus out. Anyway last week I did manage to & I seem to have a stutter it's hard to explain but I'll try. I do my burnout no worries stage & hit it out the hole sweet then I get a feeling like it's starving for fuel then less...

Hi Guy's, I'm looking at buying a 59 Plymouth it is a driver. I will need it transported from Ignacio Colorado to Orange County California. I need a quote on shipping if anybody is interested PM me. Thanks Oz

Hi Guy's, Ok I am looking at buying another MoPar which is located in Colorado I have to have it shipped to Orange county for export. I need the name & contact details of some tried & trusted transport companies to get a few quotes from. Cheers Oz

Thanks Inertia, Part numbers are the same according to that list. I've saved that site it looked to have some great info I'll go & check it out when I have more time. Cheers Graham