PRH's latest activity

  • PRH
    PRH replied to the thread Oil be darn.
    Didn’t you supply new valves……… and assembled the heads yourself?
  • PRH
    PRH replied to the thread Oil be darn.
    Did the shop doing the work make a determination on where the oil was coming from?
  • PRH
    PRH replied to the thread Oil be darn.
    Seems like a no brainer.
  • PRH
    PRH replied to the thread Oil be darn.
    Guides are good? Ex seats not recessed? Is all the hardware in decent condition? Springs are appropriate for the cam? Exactly what do...
  • PRH
    PRH replied to the thread Oil be darn.
    I think the SM(or pro maxx or Ede)are the smart move. Unless the shop you’re dealing with offers to do your current heads for a very...
  • PRH
    PRH replied to the thread 383 new rebuilt starting issue.
    Solid or Hyd cam? Can you go over your valve adjustment procedure?
  • PRH
    PRH reacted to aaronk785's post in the thread Mild 360 engine rebuild recommendations with
    Like
    Like
    .
    Speed pro h116cp are duplicate weight. They should give you about 9.5 to 1 with stock type heads. Just food for thought. Mine were...
  • PRH
    PRH replied to the thread Mild 360 engine rebuild recommendations.
    Keep in mind that pretty much any “performance oriented” piston will be enough lighter than the OE pistons that the crank will need...
  • PRH
    PRH reacted to Kendog 170's post in the thread Cam install confusion with
    Like
    Like
    .
    That's how my dad did his chevy
  • PRH
    PRH replied to the thread Oil be darn.
    You’ll have a better idea on if there was any worthwhile bowl work done, after the valves are removed.
  • PRH
    PRH replied to the thread This cam ok for low comp street motor?.
    The K6421 is basically a repop of the old factory non-hp 4bbl cam*, and is a step down(in terms of power potential) from the one in the...
  • PRH
    PRH replied to the thread Quadrajet vs Edelbrock 1405.
    You should verify the Qjet in question is something that’s not from smog era before jumping on that band wagon. Also, you’re not going...
  • PRH
    PRH replied to the thread 383 new rebuilt starting issue.
    Hopefully that’s it, but…. Have you bumped the engine over with the starter since the engine was last running? If so, the starter will...
  • PRH
    PRH replied to the thread Magnum head valve keepers.
    Yup, a rounded groove instead of square.
  • PRH
    PRH replied to the thread Magnum head valve keepers.
    The magnum engines use valves that have single bead lock grooves. SBI number 121-1021
Show older items
Back
Top Bottom