racerjoe's latest activity

  • racerjoe
    I don’t have a gold box, I have the MS3X which is essentially the same thing. I’m using the back side of the wheel studs. The spindles...
  • racerjoe
    Ya'll remember the 6.1 heads I mentioned above? Well, I started making some aluminum chips with them. I'm almost halfway filling soup...
    • 1.jpg
    • 2.jpg
    • 3.jpg
    • 4.jpg
    • 5.jpg
    • 6.jpg
  • racerjoe
    I have TC disabled now. MS is just to slow for it to be of any benefit on the autox. That coupled with my larger and better tires now, I...
  • racerjoe
    100% this! I'm sure ABS helps on an autox to an extent but I've never driven a car on the autox with it, so I wouldn't have any first...
  • racerjoe
    According to google, the Challenger RT became available with a manual transmission in 2009 and weighed 4041lbs. Now under $10K would...
  • racerjoe
    racerjoe reacted to 75slant6's post in the thread 12:05 Garage- ’70 Duster build with
    Like
    Like
    .
    Yes but buying/building a Mustang because it’s faster and cheaper than a Mopar is like ordering a hamburger steak instead of a ribeye...
  • racerjoe
    racerjoe replied to the thread Blue Print Hemi.
    This is false. I had a 408 with good aluminum heads, solid roller cam, etc and swapped in the less desirable pre-eagle 5.7 with only a...
  • racerjoe
    racerjoe replied to the thread 72 Dart Hemi swap.
    If you don't want to modify the tunnel, just run a 2.76 or 3.23 rear gear with a 727 or 904. That's the cheapest option.
  • racerjoe
    Mehh, the easy button would certainly be to abort this mission with an old car and go with a S550 Mustang or a C5/C6 corvette. I know...
  • racerjoe
    Caster is what makes them drive straight. The problem I face is a lot of the roads around here are canted to the outside for rain...
  • racerjoe
    I run the same alignment for everything. It takes too much time to bother with changing it. The only thing I change for "streetcar" mode...
  • racerjoe
    Finished off Cruising the Coast yesterday with another successful day. We finally had a small "cool" front come in which brought a...
    • CtC 2025.jpg
  • racerjoe
    Yep, I mentioned the eagle intake in my post. My understanding is the intake contacts the triangle part of the block in the front. I...
  • racerjoe
    Since I have an early 5.7, it has the heads the internet says are junk. In reality, they aren't bad, there are just better options from...
  • racerjoe
    Hit the autocross at Cruisin the Coast twice this week, driving back and forth both days. That equals about 350ish miles of interstate...
Back
Top Bottom