Racingcowboy89's latest activity
-
ROregon cams grind no #1333 in hydraulic flat tappet is the XE Comp. Also an XE Comp is grind no #1369, if you want to push the...
-
RRacingcowboy89 replied to the thread 1987 318 LA.I have to order a stock hydraulic roller cam, then send it up to Oregon, and just have them reground it for me?
-
Rif you want stock power, then a stock cam will certainly give you that. you'll see a small bump from the intake, carb and headers but...
-
RRacingcowboy89 replied to the thread 1987 318 LA.I am reusing the crank, rods, heads, springs for the heads, mechanical fuel pump, and roller rockers. Everything else will be new except...
-
RRacingcowboy89 replied to the thread 1987 318 LA.Flat top pistons is what came with the engine when I brought it home.
-
RRacingcowboy89 replied to the thread 1987 318 LA.All the hydraulic roller cam with higher lift I keep finding are above $450 dollars on summit. Rockauto had the stock cam for $190...
-
RRacingcowboy89 replied to the thread 1987 318 LA.Well let me ask this do I need more hydraulic roller cam if I am doing a Weiand intake manifold, 600 cfm carb, and headers?
-
RRacingcowboy89 replied to the thread 1987 318 LA.I be going from a flat tappet to hydraulic roller. Flat tappet is what came with the engine when I bought it.
-
Rso, here's the million dollar question: are you rebuilding the motor or are you just wanting to stab a cam in it and roll? also, if...
-
RRacingcowboy89 replied to the thread 1987 318 LA.Yeah.... Well I am reusing the rods, 302 heads, crank, mechanical fuel pump, springs for the heads, roller rockers, new timing cover...
-
RAwesome! Experience is good. And it don’t matter if it’s Ford, Chevy, Mopar or any other make, screwing them together is similar. But...
-
RRacingcowboy89 replied to the thread 1987 318 LA.I did call the Oregon Cam place yesterday he was telling me to put the .390 hydraulic roller cam in it.
-
RRacingcowboy89 replied to the thread 1987 318 LA.I can tell you I have rebuilt me my F250 460 engine. I just never have done any Mopar 318 engines. I only got hooked on the 318 when I...
-
RRacingcowboy89 replied to the thread 1987 318 LA.Okay I will order the hydraulic roller cam and definitely put it in the block. With hydraulic roller cam you don't need zinc or do you...
-
RWhy? Everyone here that you’ve asked is giving you excellent advice to use a roller cam, a reground stock roller from Oregon cams. But...