Racingcowboy89's latest activity
-
RRacingcowboy89 replied to the thread 1987 318 LA.I actually would be okay with the bottom end being a stock crank, rods, pistons, and stock .390 hydraulic roller cam as long as it can...
-
Rokay. now that we've established that you're rebuilding the engine.... here's the deal. you need compression because 318's came with...
-
RRacingcowboy89 replied to the thread 1987 318 LA.These are pistons I want to put into the engine. DODGE Silvolite 3234HC.STD Silv-O-Lite Hypereutectic Pistons | Summit Racing
-
RRacingcowboy89 replied to the thread 1987 318 LA.The Silver O Lights is what I am looking at putting into the engine? Yes I am rebuilding the engine.
-
RRacingcowboy89 replied to the thread 1987 318 LA.I can't even find who got the stock 360 hydro roller cam.
-
RRacingcowboy89 replied to the thread 1987 318 LA.Silv-O-Lite hypereutectic pistons. Are another ones I was looking at which are a flat top I am seeing on Summit.
-
RRacingcowboy89 replied to the thread 1987 318 LA.Silver O Light UEM-1266C-020 pistons.
-
Ra *stock* 360 2bbl hydro roller would be a great compromise. but again, it depends on them pistons.
-
RRacingcowboy89 replied to the thread 1987 318 LA.I just talked to one camshaft shop here in Arizona they were saying stick 360 LA hydraulic roller cam in it?
-
RCamshaft Specifications Camshaft regrinding is limited to the re-grinders lobe profile masters. Ken has every lobe profile master on...
-
RRacingcowboy89 replied to the thread 1987 318 LA.I'll call Ken again ask him what he got that slightly higher than a .390 hydraulic roller cam.
-
Rno, just find a core. then send it up on an exchange.
-
Rokay. here's what i'd do. figure out what pistons you have and how far in the hole they are. if it's a reasonable amount, then let 'em...
-
RRacingcowboy89 replied to the thread 1987 318 LA.I am in Arizona. Would you have the numbers on those camshafts by any chance? I have to call shops here in Arizona see if there any...
-
RI think his engine came with the summit cam, he don't have the stock roller to regrind far as I can tell.