RAVano's latest activity
-
RRAVano replied to the thread Tailpipe opinion.Yes.
-
RA little stir crazy after foot surgery thought I'd share a " what's possible" . Duplicating the valance curve was easy, used on- line...
-
RRAVano replied to the thread Tailpipe opinion.So unfortunately, I brought the car up there just wanting to do the rear tailpipes for now. The shop found some stuff that needed to be...
-
-
RWell for those of you interested, here is a video of the Dart at idle with the new exhaust. TURN UP THE VOLUME!
-
RIve always wanted to run dual cuda tips each side never seen that done Prolly wont fit thinking about it
-
RTwo reasons why I like the way the factory did it. #1: keeps the road grim off the tail pipes. #2: The tail pipes are higher up from the...
-
RRAVano replied to the thread Tailpipe opinion.Went out in the garage to figure out how to mount the tips. Came up with a quick idea with what I had. Just a piece of angle iron bolted...
-
-
RNova-ish but I like it
-
Rhow ours ended up.. would have liked to trim them a bit more but the hanger was in the way and i didn't feel like screwing with them...
-
RHe loosened the tank straps and shifted it to best position, and folded tank corner a bit . It was a bit messy, proto type, so to speak.
-
RRAVano replied to the thread Tailpipe opinion.I like that idea. I’ll need to check if I have room to bring the exhaust to the inside of the frame/spring.
-
RMy son's got offset, minitubs, 2 1/2 beside the tank out between the frame and spring, back in, and the mounts/tailpipes are about an...
-
RRAVano replied to the thread Tailpipe opinion.That’s exactly how I’m going to have mine done. Although, The tips won’t be in the exact factory location. They’ll be black so it won’t...
-
RI once saw an exhaust, where the pipes had come up over the axle, then sideways between the frame and the spring, then out the back on...
-
RRAVano replied to the thread Tailpipe opinion.I have a full 3” inboard kit with mini tubs. I’ll need to come up some ideas to mount the brackets
