Recent content by rm69dart

yes those are it. anybody out there have any looking for the set.

looking for parking break actuator levers left and right, for a body 8 3/4 small bolt 4x5 10x13/4 drums, these are the ones that go in the between brake shoes and packing plate. Thanks

Took engine out and starting over taking block and heads back to machine shop. having it checked over by an other machine shop i will keep you guys posted. Thanks for all your help not only you help me but others in need to solving heating issues.

Trying to find out why or what or where this could be coming from and the over heating issue.

I used a Balkamp combustion leak block tester from napa. turns water or antfreeze from rad. different color.

No driven miles, engine just drop in. no AC, thermostat 1/8 hole drilled, water flow good, timing set at 12 degrees advance, new water pump, using a real gauge no in dash, also Lazard water temp, rad. re-core, also did a block test in water its test fail exhaust is in the water, top gets really...

Hey guys, Need some advice just rebuilt a 440 getting hot after 5 to 10 minutes of start up idling good purple cam AA heads dual carbs. what i v done re-core rad. new thermostat, taken heads to get checked out manga flex ext. took heads off 2 times just to make sure i installed them right. ok...

Thanks for your reply. do you have any more info that you can share in regards in this intake. Have a 440 rebuild with purple cam that's going in to a 66 charger auto trans. Don't know if i should go with this or just go with an Eddie intake and carb. trying to get this going been garaged for...

Hi Guys I have an Intake Manifold #854817-1 Its for a dual carb set up. on a Mopar 440 can anybody tell me what kind of carbs go on it. Any info would be really appreciated. Thanks

If the abody housing is still available i am interested. sent a pm.

Hi, need some help. recent rebuild 340 mild cam, 1406 carb. mopar elec. distributor, timing set at 16. question is when i block the vacuum line for the vacuum advance it runs great but when i unblock vacuum line to vacuum advance it has a hesitation when i raise the rpm. thanks for your help.

Hi, need some help. recent rebuild 340 mild cam, 1406 carb. mopar elec. distributor, timing set at 16. question is when i block the vacuum line for vacuum advance it runs great but when i unblock vacuum line to vacuum advance it has a hesitation when i raise the rpm. thanks for your help.

hey thanks i have the correct tube. just needed the size to cut new one.

hi, i have 69 dart 340 and looking for the size of the spacers that go through the alternator mounting bolt there is 2 a small one and long one. if any body knows how long they are please let me know. thanks.

Hey thanks guys what a difference with this MP distributor runs great never go cheapo on your distributor. oh and this was on a 340 thanks again.