Recent content by T-Fish

Yes. It’s a very smooth running engine and should be very streetable with that cam.

These headers didn’t do me any favors.

Peak numbers for one pull were 716hp @5400 and 710tq (I forgot where that fell). That was without the spacer. With the spacer, we got 706hp @5700 and 701tq @5000. This was the better of the two power spreads by a long ways. It really wanted more fuel with the spacer, but unfortunately I didn’t...

Well, the engine is on the dyno. It runs, doesn’t leak, and will be run Monday morning to see what it has. I ended up getting TF270 heads, Indy intake, and a billet Holley Dominator.

Correct, that is the color I went with. The cans come in few different sizes. I went with the 8oz can. They say that’s enough to do a set of long tube headers and that seems to be accurate from my experience. I sprayed it at 40psi (they recommend 30psi) and that probably worked to my benefit...

It comes in a can. They have three colors; silver, black, and bronze. I went to Harbor Freight and bought the cheapest spray gun they had ($15) and used that. I’ve never used a spray gun in my life! It applied incredibly well and very easy. I did miss a small spot (simply didn’t see it until I...

Will do!

I am hoping it works half as good as it looks, and holds up just as good.

I took a chance and I coated my TTI headers with Zybar. The original ceramic coating was really looking like Hell, so I blasted them clean and sprayed them this afternoon.

If you’d have called them three weeks ago they’d have told you late May.

I don’t know if I’m going to get into trouble for posting this, but I have a set of RPM and E-Street heads for sale.

That could be. I never looked at their website. I called and placed my order over the phone.

Did you try 440source for the TFS heads? They had a few sets available last week.

What is this planning thing you’re talking about?

I’m glad you were able to get through to them. They told me the same thing. I didn’t ask about buying bare heads though. I ended up buying a pair of heads from 440source. They should be delivered tomorrow. I’m working with Isky to get the springs I need for my application, as PAC somehow doesn’t...