I am planning to do a front disc brake conversion on my 63 Dart. I have the 9in drums in the front. Scarebird seems to be the easiest kit to install. I need both front hubs that are usually pressed into the drum.
Can anyone send me just the hubs without the drum?
Here are the results of my EZ Wiring: Success!
My car started right up with almost no problems! The only issue I have is 1 bad bulb in the gas gauge and the left turn blinker bulb is now out too. Where can I find new gauge cluster bulbs?
Everything else works perfect, but I still need to hook...
Yeah I fully agree. It was extremely hard to reach a tech and understand the fine print in the manual.
I am not using a ballast resistor. I have a MSD box and pertronix electronic ignition already installed and the ballast resistor has been bypassed. I forgot to mention this earlier...
Thank you for clearing this up! The EZ harness runs wires to all my accessories so I may not have to use the black (J) outlet on my gauge cluster.
Talked to sean at EZ and heres what he told me.
Ignition wiring
Mopar ignition / EZ wires
Acc = SW ACC
ST = SW START
GRD = Dont need...
Opps sorry I was referring to the 63 Mopar diagram. I accidentally put A but really meant J which is the black wire.
I will get things cleared up as I am awaiting Sean from EZ to call me back. Will let you know what he says. 67Dart everything you told seems right so I should have this...
Thanks for the Info 67Dart273! I now have a better idea of what I need to accomplish.
Heres the harness:
EZ Wiring 21 Circuit Wiring Harness Painless to Install | eBay
Yes this is the Mopar diagram I am using:
http://www.mymopar.com/downloads/1963/63DartA.jpg...
I have a 1963 dodge dart /6 170 base model. I have done tons of work to this car and my latest upgrade is the EZ wiring 21 circuit fuse box found on ebay for about $150. I am already finished with 80% of the wiring, but I have a few questions and really need some help. I have called ez wiring...