Recent content by Towboater61

Already re-clocked it to the Barracuda/ Satallite position based on this diagram

Thanks Mattax! I'm hoping that's the case. Wondering if the arm isn't the correct length, could it possibly be interchanged by just swapping out the arm, provided it fits?

Well, I got the motor back today, and after reading one of the links on here titled "Wiper Motor Interchange List" Now I'm wondering if it will even work? When I bought the car, it was just in a box in the trunk, that the previous owner said was on there but they removed, so I took his word for...

The one I purchased was the 4509, because the entire plug was missing Mattax. So all I'll have to do is make sure all the wires are in the correct positions & add the backup!! I will be getting pictures soon. And it's an automatic. Not stock by any means, but that's how I purchased it and...

Thanks to Everyone. I'll be doing like most of you said & get the harness that's Close, then just add the other wires. And 1969383S I have the regular full shop manual, But Didn't have the supplimental, So thanks on that Mattax, once I saw that, it all came together in what's left of my brain. I...

Hi all, Any ideas would be great. Parts places are telling me my 67 Barracuda is a Unicorn. & have a missing piece of the engine side harness. The piece that's missing has 8 pins. 4 wires to to the wiper motor, 1 wire to A/C compressor, 1 wire to blower motor & the last 2 wires go to the backup...

There was a set on Ebay a couple days ago & I just checked & the listing expired. But since the listing expired, that might pop up again in a week or so

Thanks!! I'm gonna fill it up tomorrow, a little at a time & see what readings I get, because the 408 is a Thirsty Girl

I used the " Spectra" sender. Was told they're on the upper end quality wise & made in Canada!!

That's Awesome. Thanks

Used a drill on the trans end & it worked in the car, which is why I'm I'm guessing gear. Thanks for the advise!!

Well, Since ya asked.....Got the car last weekend. Fuel gauge not working so I went with the most common route to fix it. swapped out the sending unit, and now it shows Something, but before I installed it, I hooked up the new sender outside the tank & had the full range of readings on the gauge...

I'd do that Too, but that's the next thing on the "To Do" list.. speedo & odometer not working either, & I'm guessing the plastic gear in the 727 trans is the culprit on that one.

Quick question for ya, would I post a question here, or hunt around for a specific topic? This is all Totally new to me. And Thanks for saying that

Thanks, I appreciate the offer, because God Knows I need all the help I can get :rofl: