THX alot for everybody`s help .
In the "Pump it Down ... Easy " Post are a pic with the other washer where came in
with 0.0825 .
My metric translater have problems with this diameter , so could someone tell me
how much metric mm (millimeters) this be ?
In Europe a nomal standart washer have 5...
THX for the "Pump it up " Threat . I try this at first befor I change the Gear Box ore something other .
I have to drain the servo oil before I expand the Power Steering Pump Valve Assembly ?
The Power Steering vent herself with left / right steer to stop or how I could get the air out ?
How...
Hi
I had a to smooth Power Steering and I think the old Power Steering Gear Box are used up .
A more direct Steering are build with the Power Steering oil pressure , or ?
How I can get a more modern Power Steering with a better handling ?
Thx for help
Hi
I have change my Ingnition Switch in the Steering Lock Housing and after that the Lock Housing
are not fixed as before , it turns with the Steering Wheel when I drive .
What I have forgot to Install , what mistake I have made ?
Thx alot for help
I have 360 J Heads where I want but in stainless steel Valves with the Lunati Voodoo Cam 268° /276° .
How are the Valve specs from the Stock 2.02 and 1.60 Valves ?
Must be all Parts stainless steel or could I take also some Stock Parts ?
Which Valve Springs did I need for this cam ?
Thx alot...
Thx for answer
I had a Stock 360 engine block with Stock Pistons . Want to but a ported and Performed J Head with 2.02 intake valves on it with this Lunati cam and hope that it makes +/- 350 hp with the Holley 650 double pump carb and the weiand 7505 intake manifold .
Hello Everybody
I have to revive this thread because I looking also for this Lunati Voodoo Cam for my
LA 360 with J Heads .
Was there any problems with this Cam about Piston / Valves damaged ( timing ) ?
Can anybody tell me more about the Performance with this Cam ?
Maybe with a Dyno ?
Thx...