Recent content by Valiant Steve

727 transmission detail's ..... Can anyone give me some info. on the year or what this came out of also if it is a lockup or non lockup unit please the numbers on the pan rail are PK 3898869 5583 4100 Thanks !

Pretty easy to cut them off take the weight off the spring and drive a wedge in between the first and second springs to spread them apart a bit so you don't cut into the main leaf while cutting the second and third springs back then clamp them after your done I used a metal strap type spring...

Don't try and put the front mount on over 2 springs it does not work as the bolts and u-bolts supplied will be to short and it will also bind the spring up and make it a solid suspension .... I tried what you were thinking and it won't work sir.

Yes you have to trim that spring back about 5-6" I just trimmed min off with a cut off wheel on a small angle grinder I used my SS springs too but I wanted to lower my car so I took the spring pak apart and now only run the main and the second leafs in my car it works awesome and the car has a...

I have one of these engines ...... I'm putting it together right now to be used in my 1970 Dart Swinger street / strip car, Installing a bigger cam solid lifter inturnal oil pump a little head and intake porting a 750 DP quick fuel carb and a new set of TTi W2 Race Headers I will be putting this...

SOLD !

I sold this item

I have a tunnel ram setup I've been thinking of parting with it is complete Holley Pro Ram W2 oval port had it powder coated so fuel from jet changes wouldn't mark it up comes with a matching pair of list #4779 Holley 750 DP carbs and the complete linkage setup $1,200 US dollars buys it very...

Yes they refined the Caltrac idea and they are a fine looking piece very well made in the USA Texas quality is very good

Has anyone tried the "ASSASSIN" TRACTION BARS made by Smith Racecraft, I bought a set for my 1970 Dart 408 they are very similar to the Caltrac's but are way more tuneable, Just wondering if anyone has any advice for me ..... Thanks !

I built that car and sold it and it has changed hands a few times the guy that has it now is asking big $$$ for it I have another intake set up the same as this one I'm going to sell

Hello guy's I have a like new Holley Pro Ram oval port W-2 intake tunnel ram with a pair of 4779 Holley 750 double pumper carb's and the linkage, I'm thinking of selling this set up as I don't think I'll use it again as I'm getting older now it made big power any ideas what this set up is worth...

Thanks for looking these parts are all sold ! No longer available .

The car is a clone but the car was originally a /6 car with no stripe and whomever cloned it did an awesome job, The cars exterior was repainted when they did a rotissory resto on the car but the door jams, under the hood and in the trunk are all original paint they did a great job as it is hard...

For Sale small block 340 Mopar Dry Sump Oiling Set Up includes 3 stage exturnail Barnes pump, Custom aluminum oil pan, block feed adaptor, Crankshaft mandrel and some lines and fittings and the oil tank as well .... $600.00 US Funds for everything located in St. Catharines, Ontario Canada