Recent content by Wayne Rider

Thank you will do

Thank you both . I will try

I am no longer getting weekly most popular topics e mail . I don't know what I done to change it , I used to get every week . If anyone can help a computer illiterate out I haven't gotten one since March 8 .

I am sorry it is not a one wire alternator. I have 12 volts to positive on alternator . I do not read continuity from ground to green wire until I turn switch on . The blue wire has 12 volts at all times switch on or off , we had all the wiring harness out and untaped , cleaned and retaped every...

I have a 1975 Dodge Dart Sport that is not charging. I have a new alternator(powermaster) and new voltage regulator (Echlin) . The motor was completely rebuilt , we have power to alternator with switch on (blue wire) the green wire reads through when you turn switch on . no power but to ground ...

Dana67Dart I am not real smart and I have a 75 Dart Sport that isn't charging . I have power on blue wire to alternator 12 volts and ground on green wire . I had a spare voltage regulator and tried it , same thing, not charging . I know with todays questionable new parts it is possible but is...

I just had my 408 Scat Crank balanced with Eagle H beam rods and Icon .030 over pistons .It took 4 slugs of mallory and 2 journals had to be drilled to take weight off. After learning hard way , motor in and severe vibration so motor back out and torn down again for balancing , go ahead and...

I was kidding about most of you. It doesn't bother me that I get called out on my mistakes but if it helps somebody else before they do the same thing I did IT's okay

I want to thank everyone , or at least most of you, for your comments and suggestions. I am pretty sure no damage has been done yet to bearings etc.. It ran 5 minutes at 2000 rpm and 5 at 2500 twice. It started to heat up a little hence the shut down between. I had a brand new Champion aluminum...

Thank You all for your comments. I bought car with a lot of new parts with it, they were stroking a 318 . I thought I was making it better and I said I was new to all this. I thhought as long as everything was new and crank , balancer, flex plate and torque converter were all internally balanced...

No sir I did not . That might have been better then . I seem to do most things backwards. It's a talent !

I am new and inexperienced but learning fast and going broke even quicker. LOL I have a 1972 360 bored .30 and stroked with a Scat Crank and Eagle H beam rods Icon pistons 11.5/1 and rings Edelbrock rpm performer heads and intake Denon 850 cfm carb Lunati voodoo cam 552 lift 297 duration with...

Just letting you guys know I bought one from US Body , bolt on . It fit well after buying lighter springs

I have learned so much since starting this project ( 1975 Dodge Dart Sport ) .1) If you stroke a 360 and use Eagle H beam rods you have to notch cylinders for rods to clear . 2) if you use a cam that requires roller rockers you have to buy pushrod checker and get right length plus have machine...

Roundback alternator is a FIT . It bolted right up and fit perfect.