Search results for query: *

Do you ( or anyone ) sell lightweight hinges for fiberglass hood on 1975 Dodge Dart Sport ?

I have learned so much since starting this project ( 1975 Dodge Dart Sport ) .1) If you stroke a 360 and use Eagle H beam rods you have to notch cylinders for rods to clear . 2) if you use a cam that requires roller rockers you have to buy pushrod checker and get right length plus have machine...

Roundback alternator is a FIT . It bolted right up and fit perfect.

Thanks and I received round back alternator today . Will try it this weekend . fingers crossed !

Yes I mean thick and I only have one pulley (no A/C ) i am not sure I am hoping roundback will fit . I am waiting on order to arrive. I was told roundback would work. The squareback will not set in place I am using aluminum mounts and have aluminum billet pulleys and it would not fit between...

Just to add to disussion . If you have a 360 with older Edelbrock aluminum heads squareback alternator won't fit. It is too wide at least on mine anyway

Thank you very much . If I can find either one now I will be good.

Thanks locomotion . Has anyone bought these or have recommendations on where to buy one ?

Thanks I didn't know how much I had to learn

I am wanting a fiberglass hood for a 1975 Dodge Dart Sport . I have heard a 1969 Cuda is the same . Is this the same as a regular Dart hood ? Also does anyone know where I could find good tail piece between tail lights chrome ?

Thanks again

Thanks any idea where reproduced panels would be ?

I don't know if it's okay or not but I have a 75 Dart Sport and my tail panel is a little rough . Anyone know where to find one ?

Thanks I will look these up

Thanks I will look these up

I see now where it says additional machining work needs to be done for these to work. I wondered if they sell pistons that fit out of box

I bought motor but on tear down had 1972 main and rod bearings so I assumed it hadn't been torn down . I am a rookie so I could be wrong but the piston comes out of cylinder and my measure with dial indicator was .090. I am learning the hard way and I know a lot of people have done 408's I just...

okay will check thanks

Thanks for info

Thank you

will do thanks

they say step head with valve relief

They are actually step head w/ valve reliefs but the entire piston was out of the cylinder. and I have closed chamber heads . I seen ad you were talking about Rocket but only after I got them. I just don't know if there is a piston to fit without machining head and still be able to run high...

I have a 1972 360 block bored .030 I have a Scat crank with 4" stroke I called Summitt and ordered pistons KB 356.030KTM after attaching to Eagle 6.123 rods they come out of hole .120 . I am using Edelbrock RPM aluminum heads and this combo won't work. I don't know are these wrong pistons ? does...

Card says duration at 50 is 242 intake 252 exhaust

Hello everyone I bought a 1975 Dart Sport with a lot of parts and I changed some too. I now have a 1972 360 block .030 over with steel crank Eagle H beam rods Keith Black 107 flattop pistons Edelbrock RPM aluminum heads Lunati voodoo cam with lift at valve .552 292 advertised duration Edelbrock...

Thanks to all I am in search of 360 now. I think it would be a lot easier for a novice and I just want a good sounding , running street driver to play with

I hope you get to . I have been wanting to try to builda nice street mopar for a long time. I have a lot of work to do but my brother is a big help. He is a big block guy though and wasn't sure where this was headed. thanks for your comment

Thanks I will get numbers and post . It is in my brothers garage so it may be a day or two

It also has Eagle rods CRS6.123C3D if that helps