suggestions for dart sport build

-
W

Wayne Rider

Active Member
Joined
Aug 6, 2022
Messages
32
Reaction score
6
Location
Beaver
Hello everyone I bought a 1975 Dart Sport with a lot of parts and I changed some too. I now have a 1972 360 block .030 over with steel crank Eagle H beam rods Keith Black 107 flattop pistons Edelbrock RPM aluminum heads Lunati voodoo cam with lift at valve .552 292 advertised duration Edelbrock RPM aluminum intake . I need suggestions on roller rockers cam card says 1.5 ratio . and I don't have a carb yet we are thinking 750cfm I don't know which way to go or if I am messing up with this combination. Will also have 727 tranny with 3000 stall converter. Any help would be appreciated
 
4000 verter sounds better
whats the duration @ 50 lsa ?
atleast a 750
 
More stall or less cam to work with a 3K stall.
Get a pro done converter from Ultimate, ProTorque, Dynamic, etc. there expensive but worth every penny.
A 750 cfm is good. At that cfm, I’d use a Holley.
Mike @B3RE can tell you what rockers work best on top of the Edelbrock heads with the least amount of modifications and/or the least correction needed for great geometry. He is super excellent to deal with. I’d run with Mikes suggestion anytime.
 
You must log in or register to reply here.
-

Back
Top