Can You Help Identify These?
- Thread starter Valkman
- Start date
-
If you mean the allen socket screw, this one has a Phillips head.
Captain Canuck
Well-Known Member
#4 looks like A pillar trim screw?
66Dvert
Working on my custom car parts again!
hmm #6 looks like a dash bezel screw , my 66 has 4 of then holding the speedo bezel in but look to be a little shorter than yours. might work for your year of car.
#2 looks like (again going off of a 66 dart) screw that holds on the top chrome trim on the door that my door panel slide into.
#1 looks like the same screws that I used to put the front kick panels on and I think the inner sill plates for the carpet hold down piece
#3 looks like outer sill plate screws
can't help on the rest. I've seen #5 somewhere but can't remember where dangit!
#2 looks like (again going off of a 66 dart) screw that holds on the top chrome trim on the door that my door panel slide into.
#1 looks like the same screws that I used to put the front kick panels on and I think the inner sill plates for the carpet hold down piece
#3 looks like outer sill plate screws
can't help on the rest. I've seen #5 somewhere but can't remember where dangit!
Moparparts
Well-Known Member
#3 is used at a variety of locations including sun visors & interior rear view mirror #6 is for the dash cluster #4 is as mentioned A-Pillar #1 also was used at different locations i can't tell exactly how large the washer is but that type is used to hold the windshield fluid tank out under the hood and some dash structure locations inc the ground wire #5 looks like the one that is used for the rear sill plate extensions #2 is used for the weatherstrip end caps on your doors
Oklacarcollecto
Life is an experiment
-
