69 340 dart
Well-Known Member
In going through my pile of 833 trans I have that has me stump'd me. I have a 4 speed with a Inland shifter on it and there is not a boss with the 833 number's on it.
So here it goes.
Both main and tail shaft housing's are cast iron with a short tail housing.A body.
Casting numbers
Main housing C96561H And 10_7
Shift cover C95664W and 10x5
Tail Housing C96706H and 9x28
23 spline input shaft and a small output shaft.
One other question on the 833OD
I have one with a cast iron main housing and alm tail and another with a alm main housing and a cast iron long tail housing.
If some one can help me figure out all of this it would help me decide the pile they go in.
Brent
So here it goes.
Both main and tail shaft housing's are cast iron with a short tail housing.A body.
Casting numbers
Main housing C96561H And 10_7
Shift cover C95664W and 10x5
Tail Housing C96706H and 9x28
23 spline input shaft and a small output shaft.
One other question on the 833OD
I have one with a cast iron main housing and alm tail and another with a alm main housing and a cast iron long tail housing.
If some one can help me figure out all of this it would help me decide the pile they go in.
Brent