Console location 72 Duster

DueceDuster · May 22, 2015

I am putting in a console in my Duster. I have to weld in the mounting bracket. Does anyone have measurements for the bracket or the console placement?
I also need to mount the new bucket seats, what are the measurements for placement of the new inner mounting holes?
I assume the reinforcement plate for the inner mounting holes weld to the under side of the floor. Any help appreciated. Thanks.

Tony Fields · May 22, 2015

Here's a link

http://s88.photobucket.com/user/360scamp/library/A-body console tech?sort=3&page=1

I used this to locate mine.

DueceDuster · May 22, 2015

Thanks.

RedFish · May 22, 2015

added plates for buckets go inside not under the car. Factory floor pan has dimples stamped where the 4 holes would be drilled. You'll need 4 rubber plugs where a bench was mounted.

DueceDuster · May 25, 2015

I assumed the bucket seat tracks would use the same outside holes as the bench. Good to know it doesn't. So look for the dimples, thanks.

Heywodja · Jun 1, 2015

Just finished this up myself where the PO had drilled about 15 holes for some crappy seTs out of a foriegn car

Console location 72 Duster

DueceDuster

Well-Known Member

Tony Fields

That's How I Roll

DueceDuster

Well-Known Member

RedFish

Well-Known Member

DueceDuster

Well-Known Member

Heywodja

The Heartbeat Stops Here

Attachments