Race distributor
- Thread starter A/MP
- Start date
-
Nope, they quit makin it. Pertronix still makes their stuff though.
Brandon Weaver
Well-Known Member
Mallory? Dunno if they still make theirs....
Charrlie_S
Well-Known Member
Why do you need a race distributor? There are several options.
1: a stock recurved electronic dist.
2: A stock fixed (lean burn) dist, and a digital box that allows a custom curve
3: Crank trigger, and coil on plug system.
Myself I run a "lean burn" dist fixed at 15-20 degrees (depends on how much nitrous), and a MSD 6 box. Not good for a street car.
1: a stock recurved electronic dist.
2: A stock fixed (lean burn) dist, and a digital box that allows a custom curve
3: Crank trigger, and coil on plug system.
Myself I run a "lean burn" dist fixed at 15-20 degrees (depends on how much nitrous), and a MSD 6 box. Not good for a street car.
CichliDart
Well, where is it now?
CichliDart
Well, where is it now?
Charrlie_S
Well-Known Member
That is not a good choice for a street car. There is no vacuum advance, so fuel milage will suffer.
Also MSD did buy Mallory, and I would be concerned that repair/replacement parts will become hard to find.
http://info.mallory-ignition.com/88-msdp-merges-msd-and-mallory-ignition.html
Also MSD did buy Mallory, and I would be concerned that repair/replacement parts will become hard to find.
http://info.mallory-ignition.com/88-msdp-merges-msd-and-mallory-ignition.html
madmax/6
Well-Known Member
I also run the fixed lean burn dist and msd box and a dial timing control on my dash.
-
