JBurch
Well-Known Member
Cleaning house, all items are located in Owego, NY zip 13827, prices DO NOT INCLUDE shipping. Pictures available upon request. Prices obo.
Pair of Comp Engineering 3 way adjustable rear shocks "A" body: $30.00
3 dog dish hub caps: $25.00
set of 4 14 inch trim rings, 1 has a ding: $40.00 SOLD
2 other trim rings 14 inch: $20.00
67 to 72 340/360 engine brackets with biskets: $50.00 SOLD
"A" body 833 4spd, good shape, 2.66 low gear: $350.00
Pair of 65 273 heads, good shape: $50.00
Ferrea valves 2.02, 1.6, 6000 series race, with Comp springs and retainers, intake .100 long, exhaust .075: $275.00
Edelbrock Torquer 340 single plane intake, no stripped holes: $100.00
Hydraulic cam, not sure of who make it, .480 lift single pattern, new lifters, rocker arm assemblies with hold downs, new Edelbrock springs (take offs): $120.00
Adjustable pinion snubber: $20.00 SOLD
Early "A" body wiper arm transmissions: $20.00
2 early "A" instrument clusters: $25.00 each
Small ball joint, upper, with boot: $10.00
Small ball joint socket, Mac tools: $15.00 SOLD
Lower control arm bushings: $10.00
Tie rod ends, 2, Moog: $10.00
One upper control arm bolt: $5.00
Pair of upper control arm frame bumpers: $5.00
Chrome water out let, 273: $5.00
rear spring shackle bushings: $5.00
65 Dart wheel opening trim, 1 piece, don't remember if it's front or rear, left or right: $5.00
Early "A" idler arm, used, still tight: $5.00
67 and up Poly transmission mount, new: $15.00
Set of NOS .030 over Jahnns 273 pistons with pins, 11 to 1 compression ratio, these are cast: $400.00
Pm me with requests, please include your e-mail so I can send you pictures.
Thank you for looking.
Pair of Comp Engineering 3 way adjustable rear shocks "A" body: $30.00
3 dog dish hub caps: $25.00
set of 4 14 inch trim rings, 1 has a ding: $40.00 SOLD
2 other trim rings 14 inch: $20.00
67 to 72 340/360 engine brackets with biskets: $50.00 SOLD
"A" body 833 4spd, good shape, 2.66 low gear: $350.00
Pair of 65 273 heads, good shape: $50.00
Ferrea valves 2.02, 1.6, 6000 series race, with Comp springs and retainers, intake .100 long, exhaust .075: $275.00
Edelbrock Torquer 340 single plane intake, no stripped holes: $100.00
Hydraulic cam, not sure of who make it, .480 lift single pattern, new lifters, rocker arm assemblies with hold downs, new Edelbrock springs (take offs): $120.00
Adjustable pinion snubber: $20.00 SOLD
Early "A" body wiper arm transmissions: $20.00
2 early "A" instrument clusters: $25.00 each
Small ball joint, upper, with boot: $10.00
Small ball joint socket, Mac tools: $15.00 SOLD
Lower control arm bushings: $10.00
Tie rod ends, 2, Moog: $10.00
One upper control arm bolt: $5.00
Pair of upper control arm frame bumpers: $5.00
Chrome water out let, 273: $5.00
rear spring shackle bushings: $5.00
65 Dart wheel opening trim, 1 piece, don't remember if it's front or rear, left or right: $5.00
Early "A" idler arm, used, still tight: $5.00
67 and up Poly transmission mount, new: $15.00
Set of NOS .030 over Jahnns 273 pistons with pins, 11 to 1 compression ratio, these are cast: $400.00
Pm me with requests, please include your e-mail so I can send you pictures.
Thank you for looking.
