[FOR SALE] needs finished roller 1973 street/strip duster for sell

-
Status
Not open for further replies.

mopar65

Well-Known Member
Joined
Mar 23, 2008
Messages
2,072
Reaction score
1,161
Location
Laquey MO
Rating - 100%
1   0   0
Contact seller
I have a 1973 Plymouth duster that had the lower inner and outer 1/4 replaced. I had the vent grill filled in,the one below the front windshiled. I was going to run a 7 inch cowl hood scoop. The drivers side A-pillar has been repaired and the car is in paint. I did strip it down to a bare shell,but have everything to put it back together except all the windshield weather stripping. The car is a factory 318 dumb brake car with A/C. I was making a race car out of it so I welded up all the unused firewall holes. I am at work now so won't be able to load up pictures until tonight. I was putting a 72 duster frontend on the car,with fiberglass fenders,which need finished. I have a brand new pair of fiberglass head light buckets for it. Also have a 72 duster parts car that goes with it. So I am asking $700 for it all,some body please come get it so I don't have to look at it anymore. Oh I live in Laquey MO zip 65534 thanks mopar65
 
Status
Not open for further replies.
-
Back
Top