slant 6 big valves

-
MOPARHOTRODS

MOPARHOTRODS

Well-Known Member
Joined
Sep 21, 2014
Messages
336
Reaction score
8
Location
wilmington,delaware
I have an extra Slant six ported and Polished head I'm looking for a set of Big Valves for it does anybody have a lead looking for stainless

didn't see any on eBay
 
The go-to source for good big valves for a Slant-6 is Engnbldr; here is a set of the exhausts—give 'em a call on 503-257-7947 for the intakes.

(Be very careful before you decide to give any money to Clifford. They have a long and ugly reputation for being a bunch of clowns; see for example here, here, here, here, and here. Much of what they sell is inaccurately described, and a lot of it is not even slightly cost-effective. The good news is that you don't need to go to Clifford to get hot rod parts for slant-6s; there are lots of other, better options. See for example Dutra Duals and header options discussed in this thread and this one, Erson custom cams, HEI ignition upgrade, Mike Jeffreys windage trays, Hurricane intakes, other exotic intakes. Hi-perf engine buildup here, high-perf parts and build info here)
 
MOPARHOTRODS said:
I have an extra Slant six ported and Polished head I'm looking for a set of Big Valves for it does anybody have a lead looking for stainless

didn't see any on eBay
Click to expand...
The head was already set-up for the std. Mopar OS
1.70/1.44 valves?
 
slantsixdan said:
The go-to source for good big valves for a Slant-6 is Engnbldr; here is a set of the exhausts—give 'em a call on 503-257-7947 for the intakes.

(Be very careful before you decide to give any money to Clifford. They have a long and ugly reputation for being a bunch of clowns; see for example here, here, here, here, and here. Much of what they sell is inaccurately described, and a lot of it is not even slightly cost-effective. The good news is that you don't need to go to Clifford to get hot rod parts for slant-6s; there are lots of other, better options. See for example Dutra Duals and header options discussed in this thread and this one, Erson custom cams, HEI ignition upgrade, Mike Jeffreys windage trays, Hurricane intakes, other exotic intakes. Hi-perf engine buildup here, high-perf parts and build info here)
Click to expand...
Hi Dan, I know this is an old post, but I tried some of the sources you have listed here, without much luck. I'm looking for a source for larger intake and exhaust valves for my 225 build.
Norm
 
Ford 300 valves....been done on slantsix.org
ford300.jpg


Let's talk valve sizes - Page 2 - Slant Six Forum
 
You must log in or register to reply here.
-

Back
Top