What do these fit?

-
hangn0ut

hangn0ut

Well-Known Member
Joined
Dec 3, 2012
Messages
747
Reaction score
125
Location
rialto.ca.
These been hanging on the wall at least 15 years. I think their for A body/hemi. 7 and 8 pipes look to go round the frame rail. Look familiar to anybody?
1534111333741-484845718.jpg
1534111471137-229357797.jpg
 
Have 4 sets of zoomies. Been on the wall bout as long as the headers. 3 for 426 hemi and 1 for 392.
 
look like hemi, evenly spaced tubes, need a picture
 
Send me a PM on what you will take for the 392 zoomies if you want to sell them. Thanks.
 
I had a set of Mazzolini/Pro-Parts B/RB headers for A's that looked like that with the 2 pipes out the side. you may be correct: A body Hemi?
 
pishta said:
I had a set of Mazzolini/Pro-Parts B/RB headers for A's that looked like that with the 2 pipes out the side. you may be correct: A body Hemi?
Click to expand...
Iam thinking they are but it would be nice to have confirmation. Surely someone who has wrestled with a set would remember what they looked like. There is a chance they might be off a tube chassis car,custom made or something. I say that because I see none of the dents or dings one might normally see on a big tube header installed on a production chassis.
 
Check to see if there are any numbers/letters stamped on the inside or outside of the header flanges. That might provide a clue.
 
Rocket said:
Check to see if there are any numbers/letters stamped on the inside or outside of the header flanges. That might provide a clue.
Click to expand...

look a lot like th b body headers we used to run on the hemi belvedere------------
 
Went over these headers looking for any markings as was suggested. Nothing. And the head side of the flange is flat. No raised bead around the ports. Since I've got the hemi out of my belvedere,sitting on the k-frame, I might as well see how they fit.
 
You must log in or register to reply here.
-

Back
Top