Mystery Component

-
69valiant21

69valiant21

Well-Known Member
Joined
Apr 14, 2012
Messages
218
Reaction score
66
Location
SE Michigan
Does anyone know what this is? I can't find it on my schematic. It's behind the glove box. There's a yellow with black trace, black with white trace, a yellow, and a black wire going to it. It's a 69 valiant for those who will be asking.
20190124_185419.jpg
20190124_185409.jpg
 
Wow! That’s an engine blower control relay just like the one on the Ram charger in Lone Wolf McQuaid (Chuck Norris)

I know I know- not everyone gets that reference.
 
It’s called a harass a tater, it’s connected to the 8 inch I beam bender to adjust the frame rails.
 
Headlight warning buzzer.

Part # 2926733
 
Last edited:
Here are Barracuda drawings but basically the same. If you leave your headlights on and ignition is off when you open a door you get the buzzing. Assuming the buzzer still functions. This was installed on all A01 optioned cars.

You can see you have dual contact door switches. One set of contacts operates the map/dome and the other the headlight warning buzzer arrangement.
 

Attachments

  • 69 Barracuda Factory Wiring REV 3.pdf
    127.2 KB · Views: 297
Last edited:
pishta said:
View attachment 1715280384
Click to expand...

Those are the set I created and look at the lower left side for the Buzzer wiring and trace it from there. There is a connector off the headlamp switch (Black wire) that ties in as well as either door switch (yellow/black trace) and the black white is fused power from the fuse box.
 
1969383S said:
Here are Barracuda drawings but basically the same. If you leave your headlights on and ignition is off when you open a door you get the buzzing. Assuming the buzzer still functions. This was installed on all A01 optioned cars.

You can see you have dual contact door switches. One set of contacts operates the map/dome and the other the headlight warning buzzer arrangement.
Click to expand...

That is a very nice set of schematics !
 
1969383S said:
Here are Barracuda drawings but basically the same. If you leave your headlights on and ignition is off when you open a door you get the buzzing. Assuming the buzzer still functions. This was installed on all A01 optioned cars.

You can see you have dual contact door switches. One set of contacts operates the map/dome and the other the headlight warning buzzer arrangement.
Click to expand...

1969383S said:
Those are the set I created and look at the lower left side for the Buzzer wiring and trace it from there. There is a connector off the headlamp switch (Black wire) that ties in as well as either door switch (yellow/black trace) and the black white is fused power from the fuse box.
Click to expand...
1969383S said:
Those are the set I created and look at the lower left side for the Buzzer wiring and trace it from there. There is a connector off the headlamp switch (Black wire) that ties in as well as either door switch (yellow/black trace) and the black white is fused power from the fuse box.
Click to expand...

1969383S Where did you get the pdf of the wiring diagram you shared?
 
Cliff'sDodge said:
Well done! I like how you can isolate systems! Do you have the 66 Dart by chance?
Click to expand...

Working on 67-69 darts but have not spent any time on them in the last year or so. I have not pulled a 66 FSM to see what it would take. If the FSM is decent I crop and underlay in Cad then retrace and color to create the cad. Once in cad all the circuits can be put in different layers so they can be manipulated and turned on and off. Lots of folks that have my 2nd gen Barracuda drawings do not realize you can do that. PDF is cool that it has that layer control ability like cad. Do not think you do that if using an iPad or such but with a PC you can! Course the systems are layered as to what made sense to me and may not suit all. Always open to suggestions though!
 
Last edited:
You must log in or register to reply here.
-

Back
Top