SS Lancer
Well-Known Member
Does anyone have suggestions or part numbers for a good quality 7 or 8 qt oil pan that fits well with a small block in a 66 Model Dart
Thanks Chris.
Thanks Chris.
Does anyone have suggestions or part numbers for a good quality 7 or 8 qt oil pan that fits well with a small block in a 66 Model Dart
Thanks Chris.
Are they any aftermarket K members for my 66 Dart ###You’ll have to modify the k frame for the milodon ones. I’m in the process of doing that right now.
Jake
View attachment 1715288551
View attachment 1715288552
View attachment 1715288553
View attachment 1715288554
I don’t believe so. I know you can modify the pan as it hits the corner of the stock frame or modify the frame. I chose the frame because I had one lying around.Are they any aftermarket K members for my 66 Dart ###
If so are they clearanced for after market oil pans.
Need one for Super Stock class drag racing .@CPDave has the Milodon road race pan in his '66 Dart (aka the Zebradart)
It required a little trimming of the pan, but could have been accomplished by a little trimming of the K-frame.
A little meaning 2" x 1/4"
If you can afford to let the pan hang below the K, the Kevco might work.
Thank you SirI also recommend Kevko Oil Pan,got one in my 74 Dart and fixing to put one in My 66 Dart (no K frame trimming)
KEVKO
Part number for pans below and then order pickup.
M301 - 318/340
M302 - 360
Mopar
My car already has a 340 in itI have a kevko pan on my 408. Also did the k-member mod. It's ridiculously easy. I highly recommend doing it.
View attachment 1715303062
View attachment 1715303063
View attachment 1715303064
My car already has a 340 in it
Car recently purchased will my crossmember still need to be modified? ????
Im using the same pan. I had to trim my K frame on my 65I attempted to go with the milodon 30941 (408 stroker) but waited 3 months and it still wasn't ready to ship. Also as noted, you have to notch the k frame. Not to wild about that
I went with a kevko m302,it is a little deeper than stock and hangs down about an inch more. Nice pan - with traps and gate assembly. And of course, it is cheaper
View attachment 1715288701
View attachment 1715288702
View attachment 1715288703
View attachment 1715288704
View attachment 1715288705
Im using the same pan. I had to trim my K frame on my 65
Thanks for the photoIm using the same pan. I had to trim my K frame on my 65