1968 barracuda formula S fender emblem locations.

mad-car-disease · Apr 24, 2019

I am converting a pair of 67 fenders to 68 formula s. Anyone by chance have the dimensions of the holes for the Barracuda emblem and S emblem.

Thank you

like_A_pike · Sep 12, 2019

Nothing huh? Anyone? I am researching the same thing. 1968 barracuda fender emblem locations. Mine originally was a base v8 however, but I think the script is in the same place.

Lets revive this thread and see what comes of it.

famous bob · Sep 12, 2019

like_A_pike said:
Nothing huh? Anyone? I am researching the same thing. 1968 barracuda fender emblem locations. Mine originally was a base v8 however, but I think the script is in the same place.

Lets revive this thread and see what comes of it.

No pics , but the engine size identification was above the form S badge.

Daves69 · Sep 12, 2019

Some S pictures if it helps. Can't get ya' dimensions as they are in storage...…….

like_A_pike · Sep 12, 2019

famous bob said:
No pics , but the engine size identification was above the form S badge.

Thanks!

Daves69 said:
Some S pictures if it helps. Can't get ya' dimensions as they are in storage...…….
View attachment 1715393029
View attachment 1715393028
View attachment 1715393018
View attachment 1715393024

View attachment 1715393031

View attachment 1715393030

Thanks! Do y'all think if you held a level in line (just below) the wheel opening. It would be in line with the bottom of the script emblem??

68 CUDA FORMULA S · Sep 12, 2019

OK here you go. First the passenger side measurements which are just slightly different than the drivers side. Measuring from where the fender meets with the door first hole for the Barracuda script is 3 3/4" second hole is 6 5/8" third hole is 9 5/16" as for the Formula S holes again from where the fender meets with the door top hole is 6 1/4" bottom hole is 6 3/8" now measuring from the top of the fender the Barracuda script is first hole closest to the door is 9 1/2" down the second hole is 9 5/8" down and the third hole is 9 5/16" down for the formula S emblem again measuring from the top of the fender top hole is 11 1/2" down the bottom hole is 13" down end of the passengers side. Drivers side measuring from where the fender meets the door Barracuda script first hole is 4 1/16" second hole is 6 3/4" and the third hole is 9 3/8" the formula S badge top hole is 6 3/16" and the bottom hole is 6 1/4" now measuring from the top of the fender the Barracuda script first hole closest to the door is 9 9/16" down the second hole is 9 5/8" down and the third hole is 9 3/8" down as for the Formula S badge the top hole is 11 1/4" down and the bottom hole is 12 3/4" down. All the holes are the same size a 7/32 drill bit fits snug. Look at the pictures hope this helps you out. To many pictures so the next shot is of the drivers side.
Good Luck
Bob

68 CUDA FORMULA S · Sep 12, 2019

Here are pictures of the drivers side, these are factory 1968 Barracuda fenders and the original sheet metal on this car so these holes are correct from the factory. These measurements are to the center of the hole, no beers yet so they are pretty close.
Bob