[Found!] Mopar Stage VI Big Block Rocker Arms

-
Status
Not open for further replies.
PROSTOCKTOM

PROSTOCKTOM

FABO Gold Member
FABO Gold Member
Joined
Oct 8, 2013
Messages
1,534
Reaction score
1,488
Location
West Central Indiana
Rating - 100%
4   0   0
Contact seller
Looking for at least the intake rocker arms for Stage VI heads. They are .450"-.465" offset on the intakes .The ones MP sold were part # P4876438 for the 1.5 ratio. Would be interested other options as well.

Thanks,
Tom
 
PROSTOCKTOM said:
Looking for at least the intake rocker arms for Stage VI heads. They are .450"-.465" offset on the intakes .The ones MP sold were part # P4876438 for the 1.5 ratio. Would be interested other options as well
Thanks,
Tom
Click to expand...

Probably more than you're looking to spend, but I've got a pair of the Chapman Stage VI's that I had Mike at B3 go through. He has a custom part number proprietary to him for the Stage VI's with TD. They're not cheap, but have all the geometry corrections that Mike is known for built in.
 
Here's the TD's
Mine are P4876383. I believe the Chapman heads were a different casting than the standard.
20180523_114404_resized.jpg
 
I am not using Stage 6 heads. Have the short side wall flat and the backside filled on a set of 452 heads. Need the Stage 6 rockers so I can move the pushrod over.

Tom
 
PROSTOCKTOM said:
I am not using Stage 6 heads. Have the short side wall flat and the backside filled on a set of 452 heads. Need the Stage 6 rockers so I can move the pushrod over.

Tom
Click to expand...

Looked at hughs rockers yet ?? Look a lot like my hughs rockers on my raised port heads , except for the oil trough.
 
Good luck. I have a new set of P5249579 Max Wedge ported heads that I’ve been looking for the same rockers.
 
Status
Not open for further replies.
-

Back
Top