67Dart273
Well-Known Member
With the HUGE old outboards project, I decided to find a plug cleaner. Hell I completely had forgotten about the old "Vixen" simple little bag 'o blasters. Bought one of egag. Now I need abrasive. ?????
who uses spark plug cleaners, what and where to get abrasive?
- Thread starter 67Dart273
- Start date
-
Harbor Freight sells all kinds of abrasive. We used glass bead.
Aluminum oxide. Remember they need to be cleaned afterwards ,to remove any trapped abrasive.
I have glass in my blast cabinet, cleaned the plugs in my old tractor,it ran way better after that. I dont make it a habit, but do whats necessary.
I use a safety pin to loosen any trapped media around the porcelain, carb cleaner and compressed air.
I have glass in my blast cabinet, cleaned the plugs in my old tractor,it ran way better after that. I dont make it a habit, but do whats necessary.
I use a safety pin to loosen any trapped media around the porcelain, carb cleaner and compressed air.
Man, I haven used 1 of them since the late 80s. It may have been the aluminum that we used to clean plugs. Kim
You could also use soda. That breaks down to mere dust and wouldn't hurt a thing if some was left on the plug.
-
