[Found!] 360 Harmonic Balancer

-
Status
Not open for further replies.
tubbedamx

tubbedamx

Location Boise, Idaho
Joined
Jan 7, 2007
Messages
801
Reaction score
261
Location
Boise, Idaho
Rating - 100%
9   0   0
Contact seller
Looking for a harmonic balancer for a 360.
Must be external balance, clean and in excellent shape. Aftermarket is ok to as long as it fits the OE timing cover.

Also looking for an installation tool or at least a part number of a tool that will remove and install.

Paypal ready
Shipping to 83709

Thanks Jim
 
They are listed new on Rockauto.com. As far as removal, you can just use a thick flat piece of metal with two holes drilled into it that are spaced the same as the lower pulley holes. Loosen the big crank nut and use that to press against as you tighten the two other bolts. The balancer will pull right off.
 
I have one that's in great shape but has the hub sleeve on it to fix the seal groove. Put me next in line. It's the left one in the pic.

Ken
Edison, NJ

DSCN5013.JPG
 
Last edited:
I have one but it is not perfect. It did however, come off of a working engine.


Balancer Bubbles.jpg
Balancer Groove.jpg
 
Status
Not open for further replies.
-

Back
Top