Edelbrock RPM Performer package

67cudavert said:

Hey all, this is the first time here, but i have read alot of helpful threads. My dilemna..
I have a 69 fast back cuda with a 1972 340 with the RPM performer series package( heads, intake, cam and a Thunder 800 cfm carb. My problem is the throttle cable and kickdown cable. Is there a package available for the necessary brackets cables and springs?

Click to expand...

Professor Fate said:

A little more info needed- you speak of a "kickdown cable", factory used a mechanical linkage. Cables are aftermarket- whose cable/kit did you use? Factory or aftermarket throttle cable?
The following is for factory linkages:
Edelbrock Throttle Lever Adapter (manciniracing.com)
Carburetor Linkage Stud (manciniracing.com)
Carburetor Linkage Stud Nut (manciniracing.com)
Throttle Return Springs (manciniracing.com)
Restoration Throttle Return Spring Bracket (manciniracing.com)

Click to expand...

Professor Fate said:

A little more info needed- you speak of a "kickdown cable", factory used a mechanical linkage. Cables are aftermarket- whose cable/kit did you use? Factory or aftermarket throttle cable?
The following is for factory linkages:
Edelbrock Throttle Lever Adapter (manciniracing.com)
Carburetor Linkage Stud (manciniracing.com)
Carburetor Linkage Stud Nut (manciniracing.com)
Throttle Return Springs (manciniracing.com)
Restoration Throttle Return Spring Bracket (manciniracing.com)

Click to expand...

xLURKxDOGx said:

Any pictures? There is a Chrysler adapter to use with your carburetor that uses the stock kick down/throttle cable.

Jake

Click to expand...

xLURKxDOGx said:

Any pictures? There is a Chrysler adapter to use with your carburetor that uses the stock kick down/throttle cable.

Jake

Click to expand...

67cudavert said:

View attachment 1715672006 View attachment 1715672007 View attachment 1715672008

Click to expand...