Air-gap manifold

-
rw@cuda1haub

rw@cuda1haub

Active Member
Joined
Jul 5, 2020
Messages
29
Reaction score
2
Location
Haubstadt in
Will an Edelbrock air-gap manifold with Edelbrock 4bbl and a 360 magnum fit under a stock hood for a 1972 Scamp?
 
I have one and it Is a tight fit... I use a drop base air filer setup. And low profile filter.. be sure to double check the stud height for the air filter hold down

7D5A7FC3-B1B0-4891-B937-B3A5A767DBDE.jpeg


477D9E45-A36F-4F32-87D4-3B48FD6963C4.jpeg
 
I have a Stealth and it was tight with a heat shield and isolator. I bought one of those push button air cleaner latches. Works slick. Very Clean.

Air Cleaner

Summit sells these too.
 
Last edited:
dano said:
I have a Stealth and it was tight with a heat shield and isolator. I bought one of those push button air cleaner latches. Works slick. Very Clean.

Air Cleaner

Summit sells these too.
Click to expand...
rw@cuda1haub said:
Will an Edelbrock air-gap manifold with Edelbrock 4bbl and a 360 magnum fit under a stock hood for a 1972 Scamp?
Click to expand...

I have an Air Gap Intake and the clearance was to close to my hood so I had to cut my hood and put dual snorkles on.. Also makes my engine breathe better...

20181012_081248.jpg


20180812_154554.jpg
 
You’ll need a drop base to be sure of no contact but it’ll fit.
5AF5A55B-FB3A-4EEF-9230-05B55D88A9A5.jpeg
 
You must log in or register to reply here.
-

Back
Top