What's the electrical pin type for MSD Distributor connection?

Hey Mopar gang!

Do any of you electrical wizards know what type of electrical pins MSD uses for their 2 pin distributor connector and where I could find them?

I'd like to make a couple harnesses using the casings I already have, but I just need the pins and wanted to buy a bunch sets to have a spares. It would be more cost effective to purchase just the pins rather than purchase a few sets of the MSD part number that doesn't really come with enough pins for usage and spares.

I've added a picture of the pins in question to illustrate what it is that I'm looking for. I don't know if these are Metri type pins or what.

Thanks!

Try a search for Molex pin connectors.

They are Amp/Tyco mate-n-Loks. The p/n for the receptical is 1-480319-0 the plug is 1-480318-0. The pins are 60618-1. the sockets are 60617-1. Mouser and Digital-key have them.

skykeith said:

They are Amp/Tyco mate-n-Loks. The p/n for the receptical is 1-480319-0 the plug is 1-480318-0. The pins are 60618-1. the sockets are 60617-1. Mouser and Digital-key have them.

Click to expand...

Wow! Thanks! You must have searched for these before or something. I'm gonna look them up. I've shopped around on Mouser and Digi-Key before for Arduino projects, so I'm familiar with those sites. Thanks again!

I bet a molex .062 pin would work too.

MoparMike1974 said:

I bet a molex .062 pin would work too.

Click to expand...

No, the Amp pins are a little over .070.